The European Physical Journal Applied Physics (EPJ AP)

Wided Zerguine, Djamila Abdi, Farid Habelhames, Meriem Lakhdari, Hassina Derbal-Habak, Yvan Bonnassieux, Denis Tondelier, Jinwoo Choi and Jean Michel Nunzi

Published online: 14 January 2019

DOI: https://doi.org/10.1051/epjap/2018180263

Effects of pulsed electrodeposition parameters on the properties of zinc oxide thin films to improve the photoelectrochemical and photoelectrodegradation efficiency

Meriem Lakhdari, Farid Habelhames, Belkacem Nessark, Mihaela Girtan, Hassina Derbal-Habak, Yvan Bonnassieux, Denis Tondelier and Jean Michel Nunzi

Published online: 14 January 2019

DOI: https://doi.org/10.1051/epjap/2018180227

Magnetorheological damper behaviour in accordance with flow mode

Joanes Berasategui, Ainara Gomez, Manex Martinez-Agirre, Maria Jesus Elejabarrieta and M. Mounir Bou-Ali

Published online: 14 December 2018

DOI: https://doi.org/10.1051/epjap/2018180182

Low-cost deposition of cupric oxide thin films for optoelectronic applications

Sanjay Kumar, Sudhir Saralch and Dinesh Pathak

Published online: 14 December 2018

DOI: https://doi.org/10.1051/epjap/2018180194

Experimental investigation of drag coefficient of free-falling deformable liquid gallium droplet

M. Sofwan Mohamad, C.M. Mackenzie Dover and K. Sefiane

Published online: 28 November 2018

DOI: https://doi.org/10.1051/epjap/2018180271

Analysis of factors affecting the performance of BIPV panels

Julien Launay, Eric W.M. Lee, Rachid Bennacer and Richard K.K. Yuen

Published online: 28 November 2018

DOI: https://doi.org/10.1051/epjap/2018180176

Open Access

Intensification of a flat solar collector efficiency

Fatima-Zohra Ferahta and Cherifa Abid

Published online: 26 October 2018

DOI: https://doi.org/10.1051/epjap/2018180160

A correction method of hole-to-hole variation mass flow of diesel injector equipped on a common-rail DI diesel engine

Xinhai Li, Yong Cheng, Xiaoyan Ma and Xue Yang

Published online: 26 October 2018

DOI: https://doi.org/10.1051/epjap/2018180155

Experimental and numerical thermal analysis of open-cell metal foams developed through a topological optimization and 3D printing process

Abdelatif Merabtine, Nicolas Gardan, Julien Gardan, Houssem Badreddine, Chuan Zhang, Feng Zhu and Xiao-Lu Gong

Published online: 18 October 2018

DOI: https://doi.org/10.1051/epjap/2018180060

Free Access

Nanofluid Al₂O₃–H₂O evaporation: energy and deposition patterns

Tianying Li, Bin Liu, Xiaoyan Ma and Rachid Bennacer

Published online: 18 October 2018

DOI: https://doi.org/10.1051/epjap/2018180082

Investigation on the melting process of phase change material in a square cavity with a single fin attached at the center of the heated wall

Müslüm Arıcı, Ensar Tütüncü, Hasan Karabay and Antonio Campo

Published online: 18 October 2018

DOI: https://doi.org/10.1051/epjap/2018180092

Effect of aligned and misaligned ventilation opening affecting energy demand and air quality in buildings

Souad Morsli, Harry Ramenah, Mohammed El Ganaoui and Rachid Bennacer

Published online: 18 October 2018

DOI: https://doi.org/10.1051/epjap/2018180119

The European Physical Journal - Applied Physics

Materials for Energy harvesting, conversion and storage (Icome 2017)

Foreword: materials for energy harvesting, conversion and storage (ICOME 2017)

Correlation between photoelectrochemical and photoluminescence measurements of Ag-doped ZnO/ITO photoanode

Estimating Al₂O₃–CO₂ nanofluid viscosity: a molecular dynamics approach

Integration of the PCM with intra-ventilation for improved thermal and inertial characteristics of the building envelope

Annealing effect on the optical and photoelectrochemical properties of lead oxide

Effects of pulsed electrodeposition parameters on the properties of zinc oxide thin films to improve the photoelectrochemical and photoelectrodegradation efficiency

Magnetorheological damper behaviour in accordance with flow mode

Low-cost deposition of cupric oxide thin films for optoelectronic applications

Experimental investigation of drag coefficient of free-falling deformable liquid gallium droplet

Analysis of factors affecting the performance of BIPV panels

Intensification of a flat solar collector efficiency

A correction method of hole-to-hole variation mass flow of diesel injector equipped on a common-rail DI diesel engine

Experimental and numerical thermal analysis of open-cell metal foams developed through a topological optimization and 3D printing process

Nanofluid Al₂O₃–H₂O evaporation: energy and deposition patterns

Investigation on the melting process of phase change material in a square cavity with a single fin attached at the center of the heated wall

Effect of aligned and misaligned ventilation opening affecting energy demand and air quality in buildings