Issue |
Eur. Phys. J. AP
Volume 11, Number 3, September 2000
|
|
---|---|---|
Page(s) | 197 - 204 | |
DOI | https://doi.org/10.1051/epjap:2000163 | |
Published online | 15 September 2000 |
https://doi.org/10.1051/epjap:2000163
3D modeling of the heating of a metal sheet by a moving arc: application to aircraft lightning protection
1
Laboratoire de Génie Électrique de Paris (LGEP) - CNRS, Universités Paris VI et Paris XI,
Supélec - plateau du Moulon, 91192 Gif-Sur-Yvette, France
2
Aerospatiale, Centre de Recherche Louis-Blériot,
12 rue Pasteur, 92152 Suresnes Cedex, France
Corresponding author: teste@lgep.supelec.fr
Received:
21
October
1999
Revised:
18
July
2000
Accepted:
18
July
2000
Published online: 15 September 2000
Within the framework of the study of the aircraft structural material lightning, we present a work concerning the heating of metal sheets under the action of a moving electric arc. A 2D and 3D modeling of thermal phenomena occurring in the heated electrodes are used in order to study the influence of the arc root velocity and of the power and the surface power density brought by the arc roots on the electrode heating.
PACS: 52.80 Mg – Arcs; sparks; lightning
© EDP Sciences, 2000
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.