Eur. Phys. J. Appl. Phys.
Volume 92, Number 1, October 2020
|Number of page(s)||7|
|Published online||14 October 2020|
Mean multiplication gain and excess noise factor of GaN and Al0.45Ga0.55N avalanche photodiodes
Faculty of Engineering and Technology, Multimedia University, Jalan Ayer Keroh Lama, 75450 Melaka, Malaysia
* e-mail: firstname.lastname@example.org
Received in final form: 21 July 2020
Accepted: 2 September 2020
Published online: 14 October 2020
In this work, Monte Carlo model is developed to investigate the avalanche characteristics of GaN and Al0.45Ga0.55N avalanche photodiodes (APDs) using random ionization path lengths incorporating dead space effect. The simulation includes the impact ionization coefficients, multiplication gain and excess noise factor for electron- and hole-initiated multiplication with a range of thin multiplication widths. The impact ionization coefficient for GaN is higher than that of Al0.45Ga0.55N. For GaN, electron dominates the impact ionization at high electric field while hole dominate at low electric field whereas Al0.45Ga0.55N has hole dominate the impact ionization at higher field while electron dominate the lower field. In GaN APDs, electron-initiated multiplication is leading the multiplication gain at thinner multiplication widths while hole-initiated multiplication leads for longer widths. However for Al0.45Ga0.55N APDs, hole-initiated multiplication leads the multiplication gain for all multiplication widths simulated. The excess noise of electron-initiated multiplication in GaN APDs increases as multiplication widths increases while the excess noise decreases as the multiplication widths increases for hole-initiated multiplication. As for Al0.45Ga0.55N APDs, the excess noise for hole-initiated multiplication increases when multiplication width increases while the electron-initiated multiplication increases with the same gradient at all multiplication widths.
© EDP Sciences, 2020
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.