Eur. Phys. J. Appl. Phys.
Volume 47, Number 3, September 2009
|Number of page(s)||10|
|Section||Physics of Energy Generation, Conversion and Storage|
|Published online||05 June 2009|
Influence of the frequential identification tests on the induction machine modelling
Institut de Recherche en Électrotechnique et Électronique de Nantes
Atlantique (IREENA), 37 bd de l'université, BP 406, 44602, Saint-Nazaire, France
Corresponding author: firstname.lastname@example.org
Revised: 5 February 2009
Accepted: 30 March 2009
Published online: 5 June 2009
An electric network is constituted by generators providing power to various loads. The induction machine is the most common motor in the industrial applications because of its simplicity of construction, its reliability and its low cost. It allows the constant speed applications when it is directly supplied by the network and variable speed ones with the use of power converters. These speed drives induce important harmonic perturbations in the power system and in the motor side. In this context, we are interested by the frequential modelling of the induction machine in order to simulate the line current with its harmonic components. In order to use the induction machine models, it is necessary to identify their parameters and therefore realizing specific and sufficiently informative tests. Several tests of identification are presented in the literature; their differences and their relevance have not been discussed. This study deals with the realization and the comparison of several types of frequential tests (constant voltage, constant V/f, injection of DC current) for induction machine models identification. The comparison of the simulation results with the experimental measurements allows electing the most representative of the induction machine behaviour.
PACS: 84.50.+d – Electric motors
© EDP Sciences, 2009
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.