Eur. Phys. J. AP
Volume 10, Number 2, May 2000
|Page(s)||123 - 130|
|Published online||15 May 2000|
Modeling and experimental characterization of saturation effect of an induction machine
LAE, HIAST (Higher Institute of Applied Sciences and Technology), BP 60318 Damascus, Syria
2 LEEI, INPT (Institut National Polytechnique de Toulouse), BP 7122, 31071 Toulouse Cedex 7, France
Corresponding author: firstname.lastname@example.org
Revised: 26 January 2000
Accepted: 26 January 2000
Published online: 15 May 2000
This paper presents a new experimental measurement method of the electrical parameters, shown from the stator, of a squirrel cage induction machine in accordance with its magnetic saturation level. It develops a new two-phase saturated model of the induction machine which uses these measured electrical parameters. This new measurement method has a very big advantage in the industrial domain. It avoids the use of a finite elements calculation program which takes much more time to calculate the electrical parameters. The experimental measurement method is applied on a 4 KW squirrel cage induction machine. A comparison between the real dynamic response of this machine, and the dynamic response of the new two-phase saturated model shows that the obtained results are very encouraging.
PACS: 07.05.Tp – Computer modeling and simulation
© EDP Sciences, 2000
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.