| Issue |
Eur. Phys. J. Appl. Phys.
Volume 43, Number 1, July 2008
|
|
|---|---|---|
| Page(s) | 79 - 86 | |
| Section | Nanomaterials and Nanotechnologies | |
| DOI | https://doi.org/10.1051/epjap:2008113 | |
| Published online | 12 June 2008 | |
https://doi.org/10.1051/epjap:2008113
Microstructure and magnetic properties of FeSiBNbCu-Al cold spray coatings
1
LERMPS-UTBM, Site de Sévenans, 90010 Belfort Cedex, France
2
FEMTO ST LPMO, UFC 32, Avenue de l'Observatoire, 25044 Besançon, France
3
LIM-ENSAM, 151 boulevard de l'Hôpital, 75013 Paris, France
Corresponding author: mohamed.cherigui@utbm.fr
Received:
2
February
2008
Revised:
26
March
2008
Accepted:
7
April
2008
Published online:
12
June
2008
In this paper, the FeSiBNbCu and FeSiBNbCu-Al coatings were synthesized using cold spray technique in order to produce ferromagnetic materials. Ultra-fine grain coatings are obtained using FINEMET nanostructured powders mixed with Aluminum. Various percentages of Aluminum characterized by its low hardness were taken in account. The obtaining coatings were formed of Aluminum matrix and randomly distribution of FINEMET particles. Indeed, magnetic measurements revealed a soft magnetic character for all the powders and the coatings. 25% of Al was considered as ideal to produce a homogenous coating with good soft magnetic properties.
PACS: 61.05.cp – X-ray diffraction / 68.37.-d – Microscopy of surfaces, interfaces, and thin films / 75.70.-i – Magnetic properties of thin films, surfaces, and interfaces
© EDP Sciences, 2008
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.