Eur. Phys. J. Appl. Phys.
Volume 24, Number 3, December 2003
|Page(s)||223 - 229|
|Section||Imaging, Microscopy and Spectroscopy|
|Published online||25 November 2003|
Identification of physical effects in flying spot photothermal non-destructive testing
SATIE – CNRS UMR 8029, École Normale Supérieure de Cachan, 61 avenue du Président Wilson, 94235 Cachan, France
Corresponding author: firstname.lastname@example.org
Revised: 10 July 2003
Accepted: 25 September 2003
Published online: 25 November 2003
Among the existing non-destructive testing techniques, the flying spot photothermal technique [CITE] appears to be a good alternative to penetrant testing for open-cracks detection in metallic structures. The technique basically consists in the local heating of a structure under test and the measurement of the temperature elevation which depends on the inspected medium properties. During the scanning of the structure, thermal and optical effects contribute to the elaboration of the photothermal signals. The thermal effect is relative to the presence of a thermal barrier in the inspected medium (e.g. crack) and the optical effects are due to the variations of the absorptivity and diffusivity factors of the inspected surface (surface conditions). Both effects are competitive and can lead to hardly interpretable signals. In this paper, the authors present a method allowing to separately identify thermal and optical effects, in order to enhance the characterization of the structure under test. The method was applied on a mockup featuring open-cracks and rough surface conditions, and allows to construct separate optical and thermal images. The resulting so-called thermal image allows to significantly highlight the presence of the cracks. Besides, the optical image enriches the characterization of the structure, since it supplements the diagnosis of the cracks and also enables to characterize other defects such as surface topology and features.
PACS: 81.70.-q – Methods of materials testing and analysis
© EDP Sciences, 2003
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.