Issue |
Eur. Phys. J. AP
Volume 1, Number 1, January 1998
|
|
---|---|---|
Page(s) | 7 - 10 | |
DOI | https://doi.org/10.1051/epjap:1998108 | |
Published online | 15 January 1998 |
https://doi.org/10.1051/epjap:1998108
HTc pour la limitation du courant*
Limiting the current with HTc materials
1
Schneider Electric, DR-Mat site A3, 38050
Grenoble Cedex 9, France
2
CRTBT, CNRS, 38042 Grenoble Cedex 9, France
3
Matformag, CNRS, 38042 Grenoble
Cedex 9, France
Auteur de correspondance : Jean-Marc barbut@mail.schneider.fr
Reçu :
8
Juillet
1997
Révisé :
23
Septembre
1997
Accepté :
15
Octobre
1997
15 Janvier 1998
Un limiteur de courant supraconducteur pourrait être utilisé en haute tension. La plupart des matériaux à haute température critique existants actuels ont été testés en situation de limitation du courant. Les matériaux massifs sont classés par densité de courant critique croissante qui correspondent à des comportements différents. Le champ critique lors des transitions semble être de l'ordre de 1 kV/m.
Abstract
Superconducting Fault Current Limiter could be used in High Voltage Network. A most part of existing HTc superconducting materials have been tested in situation to limit fault current. Bulk materials are classified by growing critical current density which correspond to different behaviours. Critical electrical field during transition seems to be about 1 kV/m.
PACS : 74.60.Jg – Cristal currents / 74.72.-h – High-Tc compounds / 81.40.Rs – Electrical and magnetic properties (related to treatment conditions)
© EDP Sciences, 1998
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.