EDP Sciences logo
Subscriber Authentication Point
Search
Menu
All issues Volume 89 / No 2 (February 2020) Eur. Phys. J. Appl. Phys., 89 2 (2020) 20902 References
Issue
Eur. Phys. J. Appl. Phys.
Volume 89, Number 2, February 2020
Electrical Engineering Symposium (SGE 2018)
Article Number 20902
Number of page(s) 9
Section Physics of Energy Transfer, Conversion and Storage
DOI https://doi.org/10.1051/epjap/2020180287
Published online 23 April 2020
  1. J. Meng, X. Wen, Y. Zhong, Z. Qiu, A thermal model for electrothermal simulation of power modules, in International Conference on Electrical Machines and Systems (ICEMS), 2013 [Google Scholar]
  2. N. Vivies, M. Haussener, H. Welemane, B. Trajin, P.-E. Vidal, Characterization of an integrated buck converter using infrared thermography, in 12th conference on Quantitative InfraRed Thermography (QIRT), 2014 [Google Scholar]
  3. B. Trajin, P.-E. Vidal, J. Viven, Electro-thermal model of an integrated buck converter, in 17th European Conference on Power Electronics and Applications (EPE), 2015 [Google Scholar]
  4. R. Kunzi, Thermal Design of Power Electronic Circuits, CAS-CERN Accelerator School: Power Converters (CERN, Geneva, 2014) [Google Scholar]
  5. C.H. van der Broeck, M. Conrad, R.W. De Doncker, Microelectron. Reliab. 55, 1938 (2015) [Google Scholar]
  6. M. Ciappa, Microelectron. Reliab. 42, 653 (2002) [Google Scholar]
  7. V.R. Manikam, E.N. Tolentino, F.N. Ramuhzan, N.M. Tajuddin, A. Aripin, Improving reliability for electronic power modules, in 36th International Electronics Manufacturing Technology Conference (IEMT), 2014 [Google Scholar]
  8. L. Xu, M. Wang, Y. Zhou, Z. Qian, S. Liu, Effect of Silicone Gel on the Reliability of Heavy Aluminum Wire Bond for Power Module During Thermal Cycling Test, in 66th Electronic Components and Technology Conference (ECTC), 2016 [Google Scholar]
  9. H. Ye, M. Lin, C. Basaran, Finite Elem. Anal. Des. 38, 601 (2002) [Google Scholar]
  10. T. Ebke, A. Khaddour, D. Peier, Degradation of silicone gel by partial discharges due to different defects, in Eighth International Conference on Dielectric Materials, Measurements and Applications, 2000, pp. 202–207 [CrossRef] [Google Scholar]
  11. S. Wen, G.-Q. Lu, Finite-element modeling of thermal and thermomechanical behavior for three-dimensional packaging of power electronics modules, in 7th Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (ITHERM), 2000 [Google Scholar]
  12. M. Haussener, S. Cailhol, B. Trajin, P.E. Vidal, F. Carrillo, Microelectron. Reliab. 55, 2045 (2015) [Google Scholar]
  13. D.C. Karnopp, D.L. Margolis, R.C. Rosenberg, System dynamics: a unified approach (John Wiley & Sons, New Jersey, 1990) [Google Scholar]
  14. J. Thoma, Bond graphs: introduction and applications (Elsevier Science, Amsterdam, 1975) [Google Scholar]
  15. P.J. Gawthrop, L.P.S. Smith, Metamodelling: bond graphs and dynamic systems, (Prentice Hall, New Jersey, 1996) [Google Scholar]
  16. D.C. Karnopp, D.L. Margolis, R.C. Rosenberg, System dynamics : modeling and simulation of mechatronic systems, 4th edn. (John Wiley & Sons, New Jersey, 2006) [Google Scholar]
  17. J.B.J. Fourier, Théorie analytique de la chaleur (Firmin Didot, pere et fils, 1822) [Google Scholar]
  18. J.R. Cannon, The One-Dimensional Heat Equation, Encyclopedia of Mathematics and Its Applications (Cambridge University Press, Cambrisge, 1984) [CrossRef] [Google Scholar]
  19. J.C. Butcher, Numerical methods for ordinary differential equations, 3rd edn. (John Wiley & Sons, New Jersey, 2016) [CrossRef] [Google Scholar]
  20. J.D. Lambert, Numerical Methods for Ordinary Differential Systems, (John Wiley & Sons, New Jersey, 1991) [Google Scholar]
  21. F.P. Incropera, Fundamentals of heat and mass transfer, 7th edn. (John Wiley & Sons, New Jersey, 2012) [Google Scholar]
  22. A. Malkin, A. Isayev, Rheology: Concepts, Methods, and Applications (ChemTec Publishing, Ontario, 2006) [Google Scholar]
  23. M.A. Meyers, K.K. Chawla, Mechanical behavior of materials (Cambridge University Press, Cambridge, 2009) [Google Scholar]
  24. P.G. Wright, Phys. Edu. 12, 323 (1977) [CrossRef] [Google Scholar]
  25. C.J. Seeton, Tribol. Lett. 22, 67 (2006) [Google Scholar]
  26. Y.C. Wang, V. Kodur, Cem. Concr. Compos. 27, 864 (2005) [Google Scholar]
  27. W. Borutzky, Bond Graph Methodology (Springer, Berlin, 2010) [CrossRef] [Google Scholar]
  28. T. Bhowmicka, B.R. Gupta, S. Pattanayaka, Cryogenics 32, 623 (1992) [Google Scholar]
  29. T. Bhowmicka, B.R. Gupta, S. Pattanayaka, Cryogenics 32, 616 (1992) [Google Scholar]
  30. T. Bhowmicka, S. Pattanayaka, Cryogenics 30, 11 (1990) [Google Scholar]
  31. S. Kashi, R. Varley, M. De Souza, S. Al-Assafi, A. Di Pietro, C. de Lavigne, B. Fox, Polym. Plast. Technol. Eng. 57, 1687 (2018) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.