Eur. Phys. J. Appl. Phys.
Volume 69, Number 3, March 2015
|Number of page(s)||8|
|Section||Imaging, Microscopy and Spectroscopy|
|Published online||12 March 2015|
Monte Carlo study of the effective electron beam shape in scanning electron microscopic imaging
Hefei National Laboratory for Physical Sciences at Microscale and Department of Physics, University of Scienceand Technology of China, 96 Jinzhai Road, Hefei, Anhui 230026, P.R. China
2 School of Nuclear Science and Technology, University of Science and Technology of China, 96 Jinzhai Road, Hefei, Anhui 230026, P.R. China
a e-mail: firstname.lastname@example.org
Accepted: 5 February 2015
Published online: 12 March 2015
Theoretical analysis of dimensional measurements made using a scanning electron microscope (SEM) requires a raw image to be corrected for the probe shape of the incident electron beam. In this paper, an effective electron beam shape (EEBS), which differs from the Gaussian profile conventionally assumed in SEM image analysis, was studied using a Monte Carlo simulation method. A model of a focusing electron beam with finite width due to aberration was used in simulating the SEM image of gold particles on a carbon substrate. It was found that the EEBS is local to the electron beam landing position and deviates significantly from the Gaussian profile; it is strongly dependent on both the sample topography and the electron beam focusing condition.
© EDP Sciences, 2015
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.