| Issue |
Eur. Phys. J. Appl. Phys.
Volume 56, Number 3, December 2011
|
|
|---|---|---|
| Article Number | 31301 | |
| Number of page(s) | 6 | |
| Section | Surfaces and Interfaces | |
| DOI | https://doi.org/10.1051/epjap/2011110206 | |
| Published online | 14 November 2011 | |
https://doi.org/10.1051/epjap/2011110206
Multi-band metamaterial absorber using cave-cross resonator
1
Department of Electronic Science and Technology, Huazhong University of Science and Technology, Wuhan 430074, P.R. China
2
College of Physical Science and Technology, Huazhong Normal University, Wuhan 430079, P.R. China
a e-mail: nieyan@mail.hust.edu.cn
Received:
27
April
2011
Revised:
15
July
2011
Accepted:
26
July
2011
Published online:
14
November
2011
Multi-band metamaterial absorber (MA) was proposed at the microwave frequency ranges, which were composed of cave-cross resonator (CCR) with different geometric dimensions, dielectric substrate and continuous metal film. Microwave experiments demonstrated the maximum absorptivity of single CCR structure to be about 99% around 9 GHz. Numerical simulations confirm that the MA could achieve very high absorptivity at wide angles of incidence for both transverse electric (TE) wave and transverse magnetic (TM) wave. Importantly, numerical simulations demonstrate that the MA could achieve perfect multi-band absorption by assembling the multi-CCR structure with different geometric parameters in a coplanar.
© EDP Sciences, 2011
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.