Issue |
Eur. Phys. J. Appl. Phys.
Volume 34, Number 3, June 2006
|
|
---|---|---|
Page(s) | 205 - 208 | |
Section | Magnetism and Superconductivity | |
DOI | https://doi.org/10.1051/epjap:2006057 | |
Published online | 24 June 2006 |
https://doi.org/10.1051/epjap:2006057
Microstructure and magnetic properties of FePt:C nanocomposite films with low ordering temperature
1
Faculty of Physics and Electronic Technology and Nanotechnology Research Centre, Hubei University, Wuhan 430062, China
2
Department of Electronic Engineering, The Chinese University of Hong Kong, Hong Kong
3
Department of Physics, The Chinese University of Hong Kong, Hong Kong
Corresponding author: nanoguy@126.com
Received:
9
December
2005
Accepted:
24
March
2006
Published online:
24
June
2006
FePt:C films were prepared by filtered vacuum arc deposition. A strong dependence of coercivity and ordering of the face-central tetragonal structure on both C concentration and annealing temperature was observed. With C concentration of 21%, the sample with a coercivity of 5.7 kOe was obtained when annealing temperature was only 350 °C. Transmission electron microscope observations revealed that FePt grains with an average size of 4.1 nm were embedded in C and appeared to be well isolated.
PACS: 75.30.Gw – Magnetic anisotropy / 75.50.Kj – Amorphous and quasicrystalline magnetic materials / 75.70.Ak – Magnetic properties of monolayers and thin films
© EDP Sciences, 2006
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.