| Issue |
Eur. Phys. J. AP
Volume 22, Number 2, May 2003
|
|
|---|---|---|
| Page(s) | 89 - 96 | |
| Section | Imaging, Microscopy and Spectroscopy | |
| DOI | https://doi.org/10.1051/epjap:2003022 | |
| Published online | 10 April 2003 | |
https://doi.org/10.1051/epjap:2003022
Low-frequency hysteresis model for nonoriented Fe-Si sheet using Preisach theory
Electrical Engineering Department, Faculté Polytechnique de Mons,
31 Bd. Dolez, 7000 Mons, Belgium
Corresponding author: olivier.deblecker@fpms.ac.be
Received:
27
March
2002
Revised:
6
December
2002
Accepted:
23
January
2003
Published online:
10
April
2003
In this work, a low-frequency dynamic hysteresis model is proposed and applied to nonoriented Fe-Si steel. The model based on Preisach theory can be used when skin effect is negligible over the lamination thickness. In our model, the Preisach engine that usually takes the magnetic field as input variable must be inverted. Some B(H) symmetric loops are calculated and compared with measurements in the rolling direction both in quasistatic and dynamic operations under sinusoidal induction.
PACS: 75.50.Bb – Fe and its alloys / 75.60.Ej – Magnetization curves, hysteresis, Barkhausen and related effects
© EDP Sciences, 2003
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.