Eur. Phys. J. AP
Volume 13, Number 3, March 2001
|Page(s)||167 - 170|
|Section||Semiconductors and Devices|
|Published online||15 March 2001|
Thermal expansion study of a “Direct Chill Casting” AlMgSi alloy
Unité de Recherche Physique des Matériaux et Applications,
Université Mentouri, Route Aïn El Bey, Constantine, 25000, Algeria
Corresponding author: firstname.lastname@example.org
Revised: 30 November 2000
Accepted: 8 January 2001
Published online: 15 March 2001
This work is concerned with the study of thermal expansion coefficient of Al-0.59 wt.% Mg-0.88 wt.% Si-0.30 wt.% Fe-0.44 wt.% Mn alloy. The presence of the anisotropy was concluded on the basis of the thermal expansion coefficient which depends up on the two directions: radial (1) and axial (2). However measured along the axial direction (2) appeared to be inferior to the measured one along the radial direction (1) in both as-cast and homogenised alloy.
PACS: 65.70.+y – Thermal expansion and density changes; thermomechanical effects
© EDP Sciences, 2001
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.