| Issue |
Eur. Phys. J. AP
Volume 11, Number 2, August 2000
|
|
|---|---|---|
| Page(s) | 123 - 130 | |
| DOI | https://doi.org/10.1051/epjap:2000153 | |
| Published online | 15 August 2000 | |
https://doi.org/10.1051/epjap:2000153
Analytic calculations of ozone concentration in an oxygen-fed DBD cylindrical ozonizer
Laboratoire d'Électronique des Gaz et des Plasmas, Université de Pau, 64000 Pau, France
Corresponding author: bernard.held@univ-pau.fr
Received:
21
March
2000
Revised:
14
June
2000
Accepted:
12
July
2000
Published online: 15 August 2000
An analytical model for ozone concentration calculation, previously described in [1,2], is applied to an oxygen-fed DBD cylindrical ozonizer. It is shown that this model can be applied to DC or DBD discharges, using an appropriate temperature law in the reaction zone. The ozone concentration, the overall parameters for ozone formation and destruction, the specific energy and the economical criterion are presented as functions of the ozonizer geometry, the electric power, the fluid flow, the temperature and the pressure. These results are compared to industrial data and a good agreement is observed.
PACS: 52.25.Dg – Plasma kinetic equations / 52.80.Hc – Glow; corona / 52.80.Tn – Other gas discharges
© EDP Sciences, 2000
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.