Issue |
Eur. Phys. J. AP
Volume 3, Number 1, July 1998
|
|
---|---|---|
Page(s) | 59 - 69 | |
DOI | https://doi.org/10.1051/epjap:1998205 | |
Published online | 15 July 1998 |
https://doi.org/10.1051/epjap:1998205
Comparative study of two structures of shunt active filter suppressing particular harmonics
GREEN-UHP, BP 239, 54506 Vandœuvre Cedex, France
Corresponding author: benchai@green-uhp.u-nancy.fr
Received:
23
June
1997
Revised:
9
December
1997
Revised:
5
March
1998
Accepted:
30
April
1998
Published online: 15 July 1998
This paper deals with the study of shunt active filters used for suppressing particular harmonics generated by nonlinear loads in utility distribution power systems. Both structures of shunt active filter, voltage source active filter (VSAF) and current source active filter (CSAF), are considered. The analytical study of specific harmonics identification in a given spectrum is first presented. For simulation as well as experimentation the nonlinear load is a conventional three phase thyristor rectifier and harmonics 5 and 7 are selected to be eliminated by active filter. The whole system consisting of the ac power supply network, the SCR rectifier and the shunt active filter (VSAF/CSAF) is then simulated. The simulation results are discussed and the efficiency of the two kinds of active filter are compared. Finally, for the first structure, VSAF, the simulation results are confirmed by experimental test realized by means of a fully digital control active power filter developed in our laboratory.
PACS: 84.30.Jc – Power electronics; power supply circuits / 84.30.Vn – Filters / 84.70.+p – High-current and high-voltage technology: power systems; power transmission lines and cables (including superconducting cables)
© EDP Sciences, 1998
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.