The European Physical Journal Applied Physics (EPJ AP)

Valorization of Tunisian alfa fibres and sumac tannins for the elaboration of biodegradable insulating panels

Houda Saad, Bertrand Charrier, Naceur Ayed and Fatima Charrier-El-Bouhtoury

Published online: 25 October 2017

DOI: https://doi.org/10.1051/epjap/2017170084

Numerical investigation of heat and momentum transfer to particles in high temperature thermal spraying

Abderrahmane Aissa, Mohammed El Ganaoui and Mohammed Sahnoun

Published online: 12 May 2017

DOI: https://doi.org/10.1051/epjap/2017160492

Numerical analysis of single and multiple jets

Mustapha Boussoufi, Amina Sabeur-Bendehina, Ahmed Ouadha, Souad Morsli and Mohammed El Ganaoui

Published online: 12 May 2017

DOI: https://doi.org/10.1051/epjap/2017170039

Free Access

Physico-mechanical properties of plywood bonded with ecological adhesives from Acacia mollissima tannins and lignosulfonates

Naima Rhazi, Mina Oumam, Abdessadek Sesbou, Hassan Hannache and Fatima Charrier-El Bouhtoury

Published online: 14 June 2017

DOI: https://doi.org/10.1051/epjap/2017170067

Influence of the dopant concentration on structural, optical and photovoltaic properties of Cu-doped ZnS nanocrystals based bulk heterojunction hybrid solar cells

Uzma Jabeen, Tham Adhikari, Syed Mujtaba Shah, Dinesh Pathak, Tomas Wagner and Jean-Michel Nunzi

Published online: 14 June 2017

DOI: https://doi.org/10.1051/epjap/2017170118

Enhancement of efficiency by embedding ZnS and Mn-doped ZnS nanoparticles in P3HT:PCBM hybrid solid state solar cells

Uzma Jabeen, Tham Adhikari, Syed Mujtaba Shah, Jean-Michel Nunzi, Amin Badshah and Iqbal Ahmad

Published online: 14 June 2017

DOI: https://doi.org/10.1051/epjap/2017170102

Photovoltaic performance of P3HT-porphyrin functionalized 1D CdS nanostructured organic inorganic bulk heterojunction hybrid solar cells

Uzma Jabeen, Tham Adhikari, Syed Mujtaba Shah, Dinesh Pathak, Tomas Wagner and Jean-Michel Nunzi

Published online: 12 May 2017

DOI: https://doi.org/10.1051/epjap/2017160491

Analysis and optimization of three main organic Rankine cycle configurations using a set of working fluids with different thermodynamic behaviors

Basma Hamdi, Mohamed Tahar Mabrouk, Lakdar Kairouani and Abdelhamid Kheiri

Published online: 14 June 2017

DOI: https://doi.org/10.1051/epjap/2017170088

Active chimney effect using heated porous layers: optimum heat transfer

Abdelhak Mehiris, Djamel-Edine Ameziani, Omar Rahli, Khadija Bouhadef and Rachid Bennacer

Published online: 12 May 2017

DOI: https://doi.org/10.1051/epjap/2017160398

Simulation of mixed convection in a horizontal channel heated from below by the lattice Boltzmann method

Nassim M. Sahraoui, Samir Houat and Nawal Saidi

Published online: 12 May 2017

DOI: https://doi.org/10.1051/epjap/2017170046

A numerical study of fluid flow and heat transfer over a fin and flat tube heat exchangers with complex vortex generators

Djamel Sahel, Houari Ameur and Youcef Kamla

Published online: 12 May 2017

DOI: https://doi.org/10.1051/epjap/2017170066

Study of heat transfer in an enclosure with a square cylinder using Lattice Boltzmann method

Mohammed Amine Moussaoui, Ahmed Mezrhab, Jean Pierre Fontaine and M’hamed Bouzidi

Published online: 14 June 2017

DOI: https://doi.org/10.1051/epjap/2017170080

Study on an antagonist differentiated heated lid driven-cavity enclosing a tube: lattice Boltzmann method

Xiaoyan Ma, Nicolas Pellerin, Marcelo Reggio and Rachid Bennacer

Published online: 19 May 2017

DOI: https://doi.org/10.1051/epjap/2017170087

Numerical analysis of Al₂O₃/water nano-fluids natural convection and entropy generation in enclosures

Boudaoud Warda, Sabeur Amina and Morsli Souad

Published online: 12 May 2017

DOI: https://doi.org/10.1051/epjap/2017170032

Free Access

Editorial

Foreword: Materials for energy harvesting, conversion and storage (ICOME 2016)

Mohammed El Ganaoui, Jean-Michel Nunzi and Rachid Bennacer

Published online: 12 May 2017

DOI: https://doi.org/10.1051/epjap/2017170112

The European Physical Journal - Applied Physics

Materials for Energy harvesting, conversion and storage II (ICOME 2016)

Valorization of Tunisian alfa fibres and sumac tannins for the elaboration of biodegradable insulating panels

Numerical investigation of heat and momentum transfer to particles in high temperature thermal spraying

Numerical analysis of single and multiple jets

Physico-mechanical properties of plywood bonded with ecological adhesives from Acacia mollissima tannins and lignosulfonates

Influence of the dopant concentration on structural, optical and photovoltaic properties of Cu-doped ZnS nanocrystals based bulk heterojunction hybrid solar cells

Enhancement of efficiency by embedding ZnS and Mn-doped ZnS nanoparticles in P3HT:PCBM hybrid solid state solar cells

Photovoltaic performance of P3HT-porphyrin functionalized 1D CdS nanostructured organic inorganic bulk heterojunction hybrid solar cells

Analysis and optimization of three main organic Rankine cycle configurations using a set of working fluids with different thermodynamic behaviors

Active chimney effect using heated porous layers: optimum heat transfer

Simulation of mixed convection in a horizontal channel heated from below by the lattice Boltzmann method

A numerical study of fluid flow and heat transfer over a fin and flat tube heat exchangers with complex vortex generators

Study of heat transfer in an enclosure with a square cylinder using Lattice Boltzmann method

Study on an antagonist differentiated heated lid driven-cavity enclosing a tube: lattice Boltzmann method

Numerical analysis of Al₂O₃/water nano-fluids natural convection and entropy generation in enclosures

Foreword: Materials for energy harvesting, conversion and storage (ICOME 2016)