Open Access
Eur. Phys. J. Appl. Phys.
Volume 50, Number 3, June 2010
Article Number 31102
Number of page(s) 15
Section Physics of Energy Generation Transfer, Conversion and Storage
Published online 17 May 2010
  1. J. Hendershot, Design of brushless permanent magnet motors (Clarendon Press Oxford, 1994), Chap. 3 [Google Scholar]
  2. D. White, H. Woodson, Electromechanical Energy Conversion (John Wiley & Sons, 1959), Chap. X [Google Scholar]
  3. N. Bianchi, M.D. Pré, Proc. IEE Electr. Power Appl. 153, 459 (2006) [CrossRef] [Google Scholar]
  4. J. Cros, P. Viarouge, IEEE Trans. Energy Conv. 17, 248 (2002) [CrossRef] [Google Scholar]
  5. A.M. El-Refaie, T.M. Jahns, D.W. Novotny, IEEE Trans. Energy Conv. 21, 34 (2006) [CrossRef] [Google Scholar]
  6. F. Libert, J. Soulard, Investigation on Pole-Slot Combinations for Permanent-Magnet Machines with Concentrated Windings, in 16th Int. Conf. on Electrical Machines, ICEM 2004, Cracow, Poland [Google Scholar]
  7. F. Magnussen, C. Sadarangani, Winding factors and Joule losses of permanent magnet machines with concentrated windings, in Electric Machines and Drives Conf. IEMDC (IEEE, 2003), Vol. 21, pp. 333-339 [Google Scholar]
  8. N. Bianchi, S. Bolognani, E. Fornasierao, A general approach to determine the rotor losses in Three-phase fractional-slot PM machines, in Electric Machines and Drives Conf. IEMDC (IEEE, 2007), Vol. 1, pp. 634-641 [Google Scholar]
  9. F. Magnussen, H. Lendenmann, Parasitic effects inPM machines with concentrated windings, in IAS Annual Meeting (2005), Vol. 2, pp. 1044-1049 [Google Scholar]
  10. Y.S. Chen, Z.Q. Zhu, D. Howe, IEEE Trans. Magn. 42, 3395 (2006) [CrossRef] [Google Scholar]
  11. L. Parsa, On Advantage of Multi-Phase Machines, in 31st Annual Conf. of IEEE Industrial Electronics Society, IEEE-IECON, 2005, p. 6 [Google Scholar]
  12. E. Levi, E. Bojoi, F. Profumo, H. Toliyat, S. Williamson, IET Electr. Power Appl. 1, 489 (2007) [CrossRef] [Google Scholar]
  13. E. Levi, IEEE Trans. Ind. Electron. 55, 1893 (2008) [CrossRef] [Google Scholar]
  14. J. Figueroa, J. Cros, P. Viarouge, IEEE Trans. Energy Conv. 21, 1 (2006) [CrossRef] [Google Scholar]
  15. H.M. Ryu, J.H. Kim, S.K. Sul, Synchronous Frame Current Control of Multi-Phase Synchronous Motor, Part I, Modeling and current control based on multiple d-q spaces concept under balanced condition in IEEE 39th IAS Annual Meeting 2004, Seattle, USA, Vol.1, p. 63 [Google Scholar]
  16. F. Scuiller, E. Semail, J.F. Charpentier, P. Letellier, IET Electr. Power Appl. 3, 102 (2009) [CrossRef] [Google Scholar]
  17. F. Scuiller, J.F. Charpentier, E. Semail, S. Clénet, A multiphase surface mounted permanent magnet design to reduce Torque Ripples and Joule losses for naval applications, in Proc. of the All Electric Ship Symposium, Versailles, France, 2005 [Google Scholar]
  18. F. Scuiller, J.F. Charpentier, E. Semail, S. Clénet, P. Letellier, Study of unconventional winding configuration of multiphase permanent magnet synchronous machine to improve reliability and torque quality for pod propulsion application, in Proc. 2nd Int. Conf. on Technological in Podded Propulsion, TPOD2006, Brest, France, 2006 [Google Scholar]
  19. F. Scuiller, J. Charpentier, E. Semail, S. Clénet, A global design strategy for multiphase machine applied to the design of a 7-phase fractional slot concentrated winding PM machine, in Proc. of ICEM'06 Conf., Chania, Greece, 2006 [Google Scholar]
  20. H.A. Toliyat, T.A. Lipo, J.C. White, IEEE Trans. Energy Conv. 6, 679 (1991) [CrossRef] [Google Scholar]
  21. H.A. Toliyat, T.A. Lipo, J.C. White, IEEE Trans. Energy Conv. 6, 684 (1991) [CrossRef] [Google Scholar]
  22. B. Mecrow, A. Jack, J. Haylock, J. Coles, Proc. IEE Electr. Power Appl. 143, 437 (1996) [CrossRef] [Google Scholar]
  23. E. Semail, A. Bouscayrol, J.P. Hautier, Eur. Phys. J. Appl. Phys. 22, 207 (2003) [CrossRef] [EDP Sciences] [Google Scholar]
  24. L. Parsa, H.A. Toliyat, Five-Phase Interior Permanent Motor with Low Torque Pulsation, in Proc. of IEEE-IAS'05, Hong-Kong, 2005, Vol. 3, pp. 1770–1775 [Google Scholar]
  25. E. Semail, X. Kestelyn, A. Bouscayrol, Right Harmonic Spectrum for the Back-Electromotive Force of a N-phase Synchronous Motor, in IEEE-IAS'04, Seattle, USA, 2004, Vol. 1, pp. 71-78 [Google Scholar]
  26. J.P. Martin, F. Meibody-Tabar, B. Davat, Multiple-phase Permanent Magnet Synchronous Machine supplied by VSIs working under fault conditions, in Industry Applications Conf. (IEEE, 2000), Vol. 3, pp. 1710-1717 [Google Scholar]
  27. F. Locment, E. Semail, F. Piriou, IEEE Trans. Magn. 42, 1427 (2006) [CrossRef] [Google Scholar]
  28. E. Klingshirn, IEEE Trans. Power App. Syst. PAS-102, 47 (1983) [Google Scholar]
  29. X. Kestelyn, E. Semail, J.P. Hautier, Vectorial multi-machine modeling for a five-phase machine, in Int. Conf. on Electrical Machine ICEM, Belgium, 2002 [Google Scholar]
  30. J. Pyrhonen, T. Jokinen, V. Hrabovcova, Design of rotating electrical machines, 1st edn. (Wiley, 2008) [Google Scholar]
  31. J. Saint-Michel, Technique de l'Ingénieur D3420, 1 (2001) [Google Scholar]
  32. Z.Q. Zhu, D. Howe, IEEE Trans. Energy Conv. 15, 407 (2000) [CrossRef] [Google Scholar]
  33. Z.Q. Zhu, D. Howe, IEEE Trans. Magn. 29, 136 (1993) [CrossRef] [Google Scholar]
  34. M. Bekemans, Ph.D. thesis, Université catholique de Louvain, 2006 [Google Scholar]
  35. M. Bekemans, F. Labrique, E. Matagne, Accurate Torque Control of VSI Fed Synchronous Machine Under Normal or Fault Conditions Using Discrete Modelling of Airgap Flux, in Proc. ICEM'06 Conf., Chania, Greece, 2006, pp. 344-1–344-6 [Google Scholar]
  36. Z.Q. Zhu, D. Howe, IEEE Trans. Magn. 29, 143 (1993) [CrossRef] [Google Scholar]
  37. J.L. Kirtley, Class Notes 5, Massachussets Institute of Technology, Department of Electrical Engineering and Computer Science, 1997 [Google Scholar]
  38. A. Foggia, Techniques de l'Ingénieur D3440, 1 (1999) [Google Scholar]
  39. E. Semail, Ph.D. thesis, Université des Sciences et des Technologies de Lille, France, 2000 [Google Scholar]
  40. F. Scuiller, Ph.D. thesis, École Doctorale de l'École Nationale Supérieure d'Arts et Métiers, 2006 [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.