Eur. Phys. J. Appl. Phys.
Volume 85, Number 1, January 2019
Electrical Engineering Symposium (SGE 2018)
|Number of page(s)||5|
|Section||Physics of Energy Transfer, Conversion and Storage|
|Published online||08 February 2019|
Thermal energy harvesting system based on magnetocaloric materials★
SATIE, ENS Paris-Saclay, CNRS, Université Paris-Saclay,
* e-mail: email@example.com
Received in final form: 19 December 2018
Accepted: 11 January 2019
Published online: 8 February 2019
We numerically study the design of a thermomagnetic generator aimed to convert a heat flow into electrical energy. The device uses the variation of magnetization of a magnetocaloric material (MCM) along a cyclic transformation between the hot and the cold sources. The magnetic energy is transformed into mechanical energy via the magnetic forces and eventually into electrical energy through an electromechanical transducer. Firstly, we work-out the optimal size of the cantilever in order to achieve the self-oscillation of the MCM between the two heat sources. Eventually, using finite element calculations, we compare the efficiency of a piezoelectric transducer (PZT 5a) with that of a set of coils in order to convert the mechanical into electrical energy. The piezoelectrics and the coils recover 0.025% and 0.018% respectively of the available mechanical energy (116 mJ/cm3). The possible strategies to achieve a better performance are discussed in theconclusion.
© EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.