| Issue |
Eur. Phys. J. Appl. Phys.
Volume 64, Number 2, November 2013
Numelec 2012
|
|
|---|---|---|
| Article Number | 24510 | |
| Number of page(s) | 7 | |
| Section | Physics of Organic Materials and Devices | |
| DOI | https://doi.org/10.1051/epjap/2013120440 | |
| Published online | 08 November 2013 | |
https://doi.org/10.1051/epjap/2013120440
Efficient FEM modeling of printed coils for eddy current testing*
1
Laboratoire de Génie Electrique de Paris - UMR 8507 CNRS - Supelec - Univ. Paris-Sud and UPMC Plateau de Moulon, 91192 Gif-sur-Yvette Cedex, France
2
CEA, LIST, 91191 Gif-sur-Yvette Cedex, France
a e-mail: houda.zaidi@lgep.supelec.fr
Received:
2
October
2012
Revised:
16
January
2013
Accepted:
2
April
2013
Published online:
8
November
2013
In this paper an approach for the modeling of the eddy current testing of a conductive part with flat printed coils is proposed. The overlapping finite element method is implemented for this purpose. It is shown that this approach allows simplifying the modeling of eddy current testing configurations that use this kind of coil.
© EDP Sciences, 2013
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.