Issue |
Eur. Phys. J. Appl. Phys.
Volume 51, Number 3, September 2010
Focus on Flexible Organic Electronics
|
|
---|---|---|
Article Number | 33210 | |
Number of page(s) | 4 | |
DOI | https://doi.org/10.1051/epjap/2010111 | |
Published online | 02 September 2010 |
https://doi.org/10.1051/epjap/2010111
Influence of p-isopropenylcalixarenestyrene copolymer buffer layer over Alq3 based OLEDs
1
Central Laboratory of Photoprocesses “Acad. J. Malinowski”,
Bulgarian Academy of Sciences, “Acad. G. Bonchev” str., bl. 109, 1113 Sofia, Bulgaria
2
Department of Polymer Engineering, Faculty of Chemistry Technology,
University of Chemical Technology and Metallurgy, Kliment Ohridsky Boulevard
8, 1756 Sofia, Bulgaria
Corresponding author: Petia@clf.bas.bg
Received:
12
October
2009
Revised:
18
March
2010
Accepted:
11
June
2010
Published online:
2
September
2010
The characteristics of organic light-emitting devices based on aluminum tris-(8-hydroxy-quinoline) (Alq3), N,N'-bis(3-methylphenyl)-N,N'-diphenylbenzidine (TPD) with novel p-isopropenyl-calix[8]arenestyrene copolymer buffer layer and Al cathode were investigated. The devices with TPD/Alq3/Al were also fabricated in the same way for comparison. The p-isopropenylcalix[8]arenestyrene copolymer used as buffer layer greatly improved the performance of the device and increased the device efficiency and stability.
© EDP Sciences, 2010
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.