Eur. Phys. J. Appl. Phys.
Volume 47, Number 2, August 200911th International Symposium on High Pressure, Low Temperature Plasma Chemistry (HAKONE XI)
|Number of page(s)||7|
|Section||11th International Symposium on High Pressure, Low Temperature Plasma Chemistry (HAKONE XI)|
|Published online||05 June 2009|
Pulsed electrical discharges in water for removal of organic pollutants: a comparative study
Grenoble Electrical Engineering Laboratory (G2E lab), CNRS and Grenoble University, 25 rue des Martyrs, BP 166, 38042 Grenoble, France
Corresponding author: firstname.lastname@example.org
Accepted: 11 May 2009
Published online: 5 June 2009
In this study, the efficiency of different types of pulsed electrical discharges for the removal of organic pollutants from wastewater has been determined. Three discharge types, either in the water volume or in close proximity to the water surface are studied. The production of hydrogen peroxide in pure water, and the degradation of two typical pollutants (4-chlorophenol and 4-nitrophenol) is measured together with the amount of electrical energy dissipated in discharges. It is shown that the energy yield for the degradation of organic pollutants, expressed in terms of degraded moles per Joule, strongly depends on the discharge type. The highest efficiency is obtained with pulsed corona discharges in humid air above the water surface. A lower efficiency is found with spark discharges in water, and the less efficient process is constituted by streamer discharges in water. The influence of ferrous ions added to solutions is also very different according to the discharge type. This helps to get a better understanding of the degradation processes involved with the different discharge types.
PACS: 52.80.-s – Electric discharges / 82.33.-Xj – Plasma reactions / 92.40.-kc – Ground water quality
© EDP Sciences, 2009
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.