Issue |
Eur. Phys. J. Appl. Phys.
Volume 44, Number 2, November 2008
|
|
---|---|---|
Page(s) | 187 - 191 | |
Section | Instrumentation and Metrology | |
DOI | https://doi.org/10.1051/epjap:2008150 | |
Published online | 19 August 2008 |
https://doi.org/10.1051/epjap:2008150
Effect of temperature and TiN addition on the characteristics of Al-Ag alloy
Physics Department, Faculty of Education, Ain Shams University, Roxy, Cairo, Egypt
Corresponding author: radwanhnada@yahoo.com
Received:
13
September
2007
Revised:
17
January
2008
Accepted:
7
April
2008
Published online:
19
August
2008
The mechanical and structural properties were studied at room temperature for Al-2wt.%Ag and Al-2wt.%Ag-1wt.%Sn alloys 503 K–583 K. The variation in the internal friction, Q−1, dynamic Young's modulus, Y, Vickers hardness, Hv, and X-ray diffraction patterns were obtained. For 533 K the internal friction showed abrupt increase while Young's modulus and Vickers hardness showed minima. The results showed a remarkable dependence of the measured parameters on both Sn addition and the heat treatment regime.
PACS: 61.72.Lk – Linear defects: dislocations, disclinations / 61.72.Ss – Impurity concentration, distribution, and gradients / 61.72.Yx – Interaction between different crystal defects; gettering effect
© EDP Sciences, 2008
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.