| Issue |
Eur. Phys. J. Appl. Phys.
Volume 42, Number 3, June 2008
|
|
|---|---|---|
| Page(s) | 193 - 202 | |
| Section | Semiconductors and Devices | |
| DOI | https://doi.org/10.1051/epjap:2008080 | |
| Published online | 06 May 2008 | |
https://doi.org/10.1051/epjap:2008080
Synthesis of Pd/SnO2 films by wet chemical route for LPG sensor
Department of Instrumentation Science, USIC Building, Jadavpur University,
Calcutta - 700 032, India
Corresponding author: msakp2002@yahoo.co.in
Received:
26
October
2007
Revised:
20
March
2008
Accepted:
26
March
2008
Published online:
6
May
2008
Pd/SnO2 composite films were obtained by wet chemical route using SnCl2:2H2O as tin containing precursor and PdCl2 as palladium containing precursor. The bilayer structures were subjected to rapid thermal annealing for the incorporation of Pd in SnO2 matrix. Pd/Sn was varied between 6 to 20% for optimizing the Pd concentration for improved sensitivity. Liquid Petroleum Gas (LPG) sensing properties were also investigated. The films thus obtained were subjected optical, microstructural, FTIR and Raman studies both before and after LPG exposure.
PACS: 73.61.Le – Other inorganic semiconductors / 81.20.Fw – Sol-gel processing, precipitation / 68.47.Fg – Semiconductor surfaces
© EDP Sciences, 2008
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.