Issue |
Eur. Phys. J. Appl. Phys.
Volume 28, Number 3, December 2004
|
|
---|---|---|
Page(s) | 347 - 353 | |
Section | Physics of Energy Generation, Conversion and Storage | |
DOI | https://doi.org/10.1051/epjap:2004172 | |
Published online | 25 August 2004 |
https://doi.org/10.1051/epjap:2004172
Experimental device to test an iron losses model by a thermal method
1
CEGELY, Université Claude Bernard Lyon, 43 boulevard du 11
novembre 1918, 69622 Villeurbanne Cedex, France
2
UTBM-L2ES, rue Thierry MIEG, Bât. F, 90010 Belfort, France
Corresponding author: raynal.glises@univ-fcomte.fr
Received:
17
December
2002
Revised:
6
April
2004
Accepted:
25
May
2004
Published online:
25
August
2004
The experimental determination of the iron losses created in a localized zone of an electric machine is a difficult operation. We try to verify and to valid by local thermal measurements the sum of local iron losses. To realize our verification, we determine the optimal measurement conditions by calculation and simulation before the realization of a prototype specially designed for this operation. This structure represents a part of an electric machine, with emphasis on inhomogeneous flux distribution areas. This device permits to obtain an experimental temperature mapping which is compared to the calculated temperature distribution obtained by finite elements modelling.
PACS: 41.20.Gz – Magnetostatics; magnetic shielding, magnetic induction, boundary-value problems / 44.10.+i – Heat conduction
© EDP Sciences, 2004
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.