Issue |
Eur. Phys. J. AP
Volume 17, Number 3, March 2002
|
|
---|---|---|
Page(s) | 209 - 214 | |
Section | Surfaces, Interfaces and Films | |
DOI | https://doi.org/10.1051/epjap:2002014 | |
Published online | 15 March 2002 |
https://doi.org/10.1051/epjap:2002014
Investigation of deposition parameters and output functions, and production of low coercivity films
1
Balikesir University, Science & Literature Faculty, Physics Department, Balikesir, 10100, Turkey
2
Cardiff University, Wolfson Centre, Newport Road, PO Box 925, Cardiff, CF24 OYF, UK
Corresponding authors: hkockar@balikesir.edu.tr meydan@cf.ac.uk
Received:
15
March
2001
Revised:
31
October
2001
Accepted:
10
January
2002
Published online: 15 March 2002
The correlation of deposition parameters with output functions when using a novel rotating cryostat (RC) system to produce magnetic materials has been investigated here. In order to do this, an orthogonal design technique was applied for magnetic material production using a resistively heated furnace. The results of orthogonal analysis indicate that the thickness uniformity across the film was not greatly improved, due to the large standard deviation, but an optimum deposition rate was obtained by appropriate choice of control parameters. Furthermore, the orthogonal design process was applied to systematically optimise the production of low coercivity in iron films. The results indicate that the process can be easily optimised.
PACS: 81.15.Ef – Vacuum deposition / 81.15.Aa – Theory and models of film growth / 75.50.Bb – Fe and its alloys
© EDP Sciences, 2002
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.