FEM simulation of residual stresses induced by laser Peening
Eur. Phys. J. AP, 23 2 (2003) 83-88
Published online: 2003-06-12
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Study About the Effect of Spot Distance on Bending Moment and the Effect of Non-uniform Spot Array in Laser Peen Forming
Jiayang Lyu, Yongjun Wang, Qiang Wang and Junbiao WangInternational Journal of Precision Engineering and Manufacturing 26 (5) 1101 (2025)
https://doi.org/10.1007/s12541-024-01185-3
Influence of Overloading on Residual Stress Distribution in Surface-Treated Wire Arc Additive-Manufactured Steel Specimens
Fraser O’Neill, Emmet McLaughlin, Anna Ermakova and Ali MehmanparastMaterials 18 (7) 1551 (2025)
https://doi.org/10.3390/ma18071551
Crystal and Dislocation Characteristics of Ti-6Al-4V Alloy Under Effect of Laser Shock Peening
Cheng Gu, Chun Wang, Jianhua Zhao, Yajun Wang and Zenghui TianMaterials 18 (2) 378 (2025)
https://doi.org/10.3390/ma18020378
Construction and finite element simulation of a square laser loading model that can replace circular spot superposition in laser peening forming
Xu PEI, Boyong SU and Liang WANGJournal of Advanced Mechanical Design, Systems, and Manufacturing 19 (2) JAMDSM0017 (2025)
https://doi.org/10.1299/jamdsm.2025jamdsm0017
Molecular dynamics study of the microstamping of TiAl6V4 alloy
Xiaohan Sun, Weijun Liu, Xingfu Yu, Yong Su, Yufeng Sun and Guisheng LiuJournal of Molecular Modeling 30 (12) (2024)
https://doi.org/10.1007/s00894-024-06207-5
Quantitative analysis of deformation characteristics and corrosion properties of high energy laser shock peened Ni-based superalloy
Yarramilli Vamsi Apuroop, Sanjay Raj, Malar Vadani, Sabeur Msolli, Pooja Gupta, Sanjay Rai, Niroj Maharjan and Ayan BhowmikSurface and Coatings Technology 494 131470 (2024)
https://doi.org/10.1016/j.surfcoat.2024.131470
129 (2024)
https://doi.org/10.1007/978-3-031-70428-4_14
A novel solid-state metal additive manufacturing process – Laser-induced Supersonic Impact Printing (LISIP): Exploration of process capability
Yiliang Liao, Fazlay Rubbi, Bo Mao, Bin Li, Fatemeh Delzendehrooy and M. Merajul HaqueAdditive Manufacturing 93 104356 (2024)
https://doi.org/10.1016/j.addma.2024.104356
Experimental and numerical investigation on residual stress of 316L SS treated by different laser shock peening parameters
Youquan Cai, Chi Cao, Qian Xu, Jie Ge, Mingya Chen, Zhenyu Ding and Jianfeng MaoOptics and Lasers in Engineering 183 108531 (2024)
https://doi.org/10.1016/j.optlaseng.2024.108531
280 (2024)
https://doi.org/10.1007/978-3-031-65007-9_31
Effects of sacrificial coating material in laser shock peening of L-PBF printed AlSi10Mg
Ondřej Stránský, Libor Beránek, Sunil Pathak, Jan Šmaus, Jaromír Kopeček, Jan Kaufman, Marek Böhm, Jan Brajer, Tomáš Mocek and František HolešovskýVirtual and Physical Prototyping 19 (1) (2024)
https://doi.org/10.1080/17452759.2024.2340656
Experimental and numerical investigation of the laser shock-based paint stripping process on CFRP substrates
Kosmas Papadopoulos, Konstantinos Tserpes, Selen Unaldi, Ines Sma, Laurent Berthe and Alexandra KaranikaOptics & Laser Technology 169 110068 (2024)
https://doi.org/10.1016/j.optlastec.2023.110068
Inverse method of eigenstrain determination of laser shock peening
Mingsheng Luo, Feng Liu and Jun TanSurface Engineering 40 (9-10) 983 (2024)
https://doi.org/10.1177/02670844241284498
Fast numerical estimation of residual stresses induced by laser shock peening
L. Lapostolle, L. Morin, K. Derrien, L. Berthe and O. CastelnauEuropean Journal of Mechanics - A/Solids 97 104844 (2023)
https://doi.org/10.1016/j.euromechsol.2022.104844
Numerical simulation for the effect of scanning speed and in situ laser shock peening on molten pool and solidification characteristics
Xianlong Li, Xu Wei, Laiqi Zhang and Qinggong LvThe International Journal of Advanced Manufacturing Technology 125 (11-12) 5031 (2023)
https://doi.org/10.1007/s00170-023-10897-1
Stepwise varying of laser parameters to enhance the residual stress field in multiple laser shock processing: numerical verification of single-point region
Guoxin Lu, Xuekun Luo, Hao Li, et al.The International Journal of Advanced Manufacturing Technology 125 (11-12) 5651 (2023)
https://doi.org/10.1007/s00170-023-11089-7
1 (2023)
https://doi.org/10.4018/978-1-6684-9843-9.ch001
Approximate residual stress and plastic strain profiles for laser-peened alloy 600 surfaces
Eui-Kyun Park, Hyun-Jae Lee, Ju-Hee Kim and Yun-Jae KimNuclear Engineering and Technology 55 (4) 1250 (2023)
https://doi.org/10.1016/j.net.2022.12.010
(2023)
https://doi.org/10.2139/ssrn.4618274
Multi-scale simulation study on the evolution of stress waves and dislocations in Ti alloy during laser shock peening processing
Cheng Gu, Minghua Su, Zenghui Tian, Jianhua Zhao and Yajun WangOptics & Laser Technology 165 109629 (2023)
https://doi.org/10.1016/j.optlastec.2023.109629
Preliminary tests on additive-manufactured Al-Sc specimens for the setup of a numerical model for Laser Shock Peening
Nicola Zavatta and Enrico TroianiJournal of Physics: Conference Series 2526 (1) 012044 (2023)
https://doi.org/10.1088/1742-6596/2526/1/012044
Exact expressions of the uniaxial perfectly elasto-plastic stress wave and induced mechanical fields in the case of a finite impact: application to laser shock peening
Lucas Lapostolle, Léo Morin, Katell Derrien, Laurent Berthe and Olivier CastelnauComptes Rendus. Mécanique 351 (G2) 459 (2023)
https://doi.org/10.5802/crmeca.227
https://doi.org/10.1002/9781119881636.ch11
Finite-element analysis of residual stresses in the TС4 titanium alloy treated by laser shock peening
O.A. Plekhov, A.A. Kostina, R.I. Iziumov and A.Y. IziumovaComputational Continuum Mechanics 15 (2) 171 (2022)
https://doi.org/10.7242/1999-6691/2022.15.2.13
Laser shock peened Ti-6Al-4 V alloy: Experiments and modeling
Jianfeng Zhao, Xinlei Pan, Jian Li, et al.International Journal of Mechanical Sciences 213 106874 (2022)
https://doi.org/10.1016/j.ijmecsci.2021.106874
Modeling and simulation of laser shock waves in elasto-plastic 1D layered specimens
L. Lapostolle, K. Derrien, L. Morin, L. Berthe and O. CastelnauInternational Journal of Solids and Structures 239-240 111422 (2022)
https://doi.org/10.1016/j.ijsolstr.2022.111422
Influence of high strain rate on the transient transmission of laser shock waves
B. Su, S. Xu, H. Wang, et al.Shock Waves 32 (5) 451 (2022)
https://doi.org/10.1007/s00193-022-01084-4
A critical comparative review of cavitation peening and other surface peening methods
Hitoshi Soyama and Alexander M. KorsunskyJournal of Materials Processing Technology 305 117586 (2022)
https://doi.org/10.1016/j.jmatprotec.2022.117586
(2022)
https://doi.org/10.21203/rs.3.rs-2037096/v1
Reconstruction of heterogeneous surface residual-stresses in metallic materials from X-ray diffraction measurements
Léo Morin, Chedly Braham, Pouya Tajdary, Raoudha Seddik and Gonzalo GonzalezMechanics of Materials 158 103882 (2021)
https://doi.org/10.1016/j.mechmat.2021.103882
Methods for the suppression of “residual stress holes” in laser shock treatment
Guoxin Lu, Lu Wang, Heng Li, et al.Materials Today Communications 28 102486 (2021)
https://doi.org/10.1016/j.mtcomm.2021.102486
Laser Peening Analysis of Aluminum 5083: A Finite Element Study
Ali Tajyar, Noah Holtham, Nicholas Brooks, Lloyd Hackel, Vincent Sherman, Ali Beheshti and Keivan DavamiQuantum Beam Science 5 (4) 34 (2021)
https://doi.org/10.3390/qubs5040034
Gradient Microstructure in Laser Shock Peened Materials
Liucheng Zhou and Weifeng HeSpringer Series in Materials Science, Gradient Microstructure in Laser Shock Peened Materials 314 139 (2021)
https://doi.org/10.1007/978-981-16-1747-8_6
Review on Laser Interaction in Confined Regime: Discussion about the Plasma Source Term for Laser Shock Applications and Simulations
Alexandre Rondepierre, Arnaud Sollier, Laurent Videau and Laurent BertheMetals 11 (12) 2032 (2021)
https://doi.org/10.3390/met11122032
Formation Mechanism of Residual Stress Field Induced by Surface Strengthening Process
G. X. Lu, R. Z. Wang, J. D. Liu and Y. Z. ZhouJournal of Testing and Evaluation 48 (4) 2936 (2020)
https://doi.org/10.1520/JTE20180393
Multiple laser shock peening effects on residual stress distribution and fatigue crack growth behaviour of 316L stainless steel
Rasool Bikdeloo, Gholam Hossein Farrahi, Ali Mehmanparast and Seyed Mohammad MahdaviTheoretical and Applied Fracture Mechanics 105 102429 (2020)
https://doi.org/10.1016/j.tafmec.2019.102429
Influence of multiple laser impacts on thin leading edges of turbine blade
M Ayeb, M Frija and R FathallahProceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications 234 (1) 130 (2020)
https://doi.org/10.1177/1464420719873936
Finite element and experimental analysis of elevated-temperature fatigue behavior of IN718 alloy subjected to laser peening
Shu Huang, Jie Sheng, Zuowei Wang, et al.International Journal of Fatigue 131 105337 (2020)
https://doi.org/10.1016/j.ijfatigue.2019.105337
Numerical Simulation on Residual Stress Field of Flat‐Topped Laser Oblique Shocking of Ni‐Based Alloy GH4169
Xiangming Qu, Yongkang Zhang, Jun Liu and José António Fonseca de Oliveira CorreiaAdvances in Materials Science and Engineering 2020 (1) (2020)
https://doi.org/10.1155/2020/8824824
Design and Modeling of Mechanical Systems - IV
Manel Ayeb, Mounir Frija and Raouf FathallahLecture Notes in Mechanical Engineering, Design and Modeling of Mechanical Systems - IV 498 (2020)
https://doi.org/10.1007/978-3-030-27146-6_54
Characteristics of stress distribution within the metal sheet bent by laser shock forming
Yunxia Ye, Xu Cao, Rang Zeng, et al.Materials Research Express 6 (9) 0965a1 (2019)
https://doi.org/10.1088/2053-1591/ab3205
Investigation on residual stress distribution in thin plate subjected to two sided laser shock processing
Xingquan Zhang, Zhiwei Huang, Bin Chen, et al.Optics & Laser Technology 111 146 (2019)
https://doi.org/10.1016/j.optlastec.2018.09.035
The Effect of Laser Peening without Coating on the Fatigue of a 6082-T6 Aluminum Alloy with a Curved Notch
Enrico Troiani and Nicola ZavattaMetals 9 (7) 728 (2019)
https://doi.org/10.3390/met9070728
Laser Shock Peening, the Path to Production
Allan H. ClauerMetals 9 (6) 626 (2019)
https://doi.org/10.3390/met9060626
Prediction of Residual Stress Random Fields for Selective Laser Melted A357 Aluminum Alloy Subjected to Laser Shock Peening
Mohammad I. Hatamleh, Jagannathan Mahadevan, Arif Malik, Dong Qian and Radovan KovacevicJournal of Manufacturing Science and Engineering 141 (10) (2019)
https://doi.org/10.1115/1.4044418
3-D FEM Simulation of Laser Peening Straightening for Shaft Straightness
Bo Yong Su, Yong Kang Zhang, Gui Fang Sun, Pei Xu, Ran Zhu and Zhong Hua NiKey Engineering Materials 765 243 (2018)
https://doi.org/10.4028/www.scientific.net/KEM.765.243
Optimization of peened-surface laser shock conditions by method of finite element and technique of design of experiments
M. Frija, M. Ayeb, R. Seddik, R. Fathallah and H. SidhomThe International Journal of Advanced Manufacturing Technology 97 (1-4) 51 (2018)
https://doi.org/10.1007/s00170-018-1849-5
Numerical Analysis of the Effect of Spot Superposition on Laser Peen Forming of Aluminum Alloy Sheet
Pei Xu, Yong Kang Zhang, Gui Fang Sun, Zhong Hua Ni, Bo Yong Su, Ran Zhu and Jian Hua WuKey Engineering Materials 765 209 (2018)
https://doi.org/10.4028/www.scientific.net/KEM.765.209
First-principles modeling of laser-matter interaction and plasma dynamics in nanosecond pulsed laser shock processing
Zhongyang Zhang, Qiong Nian, Charalabos C. Doumanidis and Yiliang LiaoJournal of Applied Physics 123 (5) (2018)
https://doi.org/10.1063/1.5021894
Comprehensive Materials Finishing
S. Gencalp Irizalp and N. SaklakogluComprehensive Materials Finishing 408 (2017)
https://doi.org/10.1016/B978-0-12-803581-8.09160-8
Numerical Study of Laser Shock Peening Effects on Alloy 600 Nozzles With Initial Residual Stresses
Ji-Soo Kim, Hyun-Suk Nam, Yun-Jae Kim and Ju-Hee KimJournal of Pressure Vessel Technology 139 (4) (2017)
https://doi.org/10.1115/1.4035977
Water Droplet Erosion Performance of Laser Shock Peened Ti-6Al-4V
Abdullahi Gujba, Lloyd Hackel and Mamoun MedrajMetals 6 (11) 262 (2016)
https://doi.org/10.3390/met6110262
Bending deformation of laser peened aluminium alloy with uniform rectangular spots
Q. Yu, Z. Dong, R. Miao, X. Deng and L. ChenMaterials Science and Technology 32 (1) 9 (2016)
https://doi.org/10.1179/1743284715Y.0000000057
Finite element analysis of laser shock peening of 2050-T8 aluminum alloy
Neila Hfaiedh, Patrice Peyre, Hongbin Song, et al.International Journal of Fatigue 70 480 (2015)
https://doi.org/10.1016/j.ijfatigue.2014.05.015
Surface mechanics design of metallic materials on mechanical surface treatments
Hitoshi SOYAMAMechanical Engineering Reviews 2 (1) 14-00192 (2015)
https://doi.org/10.1299/mer.14-00192
Modeling of residual stress field induced in Ti–6Al–4V alloy plate by two sided laser shock processing
Xingquan Zhang, Huan Li, Shiwei Duan, et al.Surface and Coatings Technology 280 163 (2015)
https://doi.org/10.1016/j.surfcoat.2015.09.004
Investigation of the fatigue life of pre- and post-drilling hole in dog-bone specimen subjected to laser shot peening
X.Q. Zhang, L.S. Chen, S.Z. Li, et al.Materials & Design 88 106 (2015)
https://doi.org/10.1016/j.matdes.2015.08.136
Recent Advances in Structural Integrity Analysis - Proceedings of the International Congress (APCF/SIF-2014)
J.S. Kim, H.S. Nam, Y.J. Kim and J.H. KimRecent Advances in Structural Integrity Analysis - Proceedings of the International Congress (APCF/SIF-2014) 265 (2014)
https://doi.org/10.1533/9780081002254.265
Effect of laser shock processing on fatigue life of fastener hole
Xing-quan ZHANG, Liu-san CHEN, Xiao-liu YU, Li-sheng ZUO and Yu ZHOUTransactions of Nonferrous Metals Society of China 24 (4) 969 (2014)
https://doi.org/10.1016/S1003-6326(14)63150-2
Encyclopedia of Thermal Stresses
Benxin WuEncyclopedia of Thermal Stresses 5225 (2014)
https://doi.org/10.1007/978-94-007-2739-7_17
Laser Peening Process and Its Impact on Materials Properties in Comparison with Shot Peening and Ultrasonic Impact Peening
Abdullahi Gujba and Mamoun MedrajMaterials 7 (12) 7925 (2014)
https://doi.org/10.3390/ma7127925
Nanodiamond powder compaction via laser shockwaves: Experiments and finite element analysis
Cheng Deng, Ming Liu and Pal MolianPowder Technology 239 36 (2013)
https://doi.org/10.1016/j.powtec.2013.01.033
Application of the Eigenstrain Theory to Predict Residual Stress around Curved Edges after Laser Shock Peening
Stefano Coratella, M. Burak Toparli and Michael E. FitzpatrickMaterials Science Forum 768-769 185 (2013)
https://doi.org/10.4028/www.scientific.net/MSF.768-769.185
Laser Shock Processing of Titanium Alloy Blade and FEM Simulation
Bing Yan and Rui WangApplied Mechanics and Materials 456 125 (2013)
https://doi.org/10.4028/www.scientific.net/AMM.456.125
Finite Element Analysis of the Variation in Residual Stress Distribution in Laser Shock Peening of Steels
Rohit Voothaluru, C. Richard Liu and Gary J. ChengJournal of Manufacturing Science and Engineering 134 (6) 061010 (2012)
https://doi.org/10.1115/1.4007780
Analysis of laser shock waves and resulting surface deformations in an Al–Cu–Li aluminum alloy
P Peyre, L Berthe, V Vignal, I Popa and T BaudinJournal of Physics D: Applied Physics 45 (33) 335304 (2012)
https://doi.org/10.1088/0022-3727/45/33/335304
Finite element analysis and comparison of laser shock peening and shot peening processes
Goran IveticInternational Journal of Structural Integrity 2 (2) 135 (2011)
https://doi.org/10.1108/17579861111135897
Experimental and Numerical Analysis of the Distribution of Residual Stresses Induced by Laser Shock Peening in a 2050-T8 Aluminium Alloy
Neila Hfaiedh, P. Peyre, I. Popa, et al.Materials Science Forum 681 296 (2011)
https://doi.org/10.4028/www.scientific.net/MSF.681.296
A numerical simulation of the residual stresses in laser‐peened friction stir‐welded aluminum 2195 joints
Kelly S. Carney, Goran Ivetic, Omar Hatamleh, et al.International Journal of Structural Integrity 2 (1) 62 (2011)
https://doi.org/10.1108/17579861111108626
Three-dimensional FEM analysis of laser shock peening of aluminium alloy 2024-T351 thin sheets
G IveticSurface Engineering 27 (6) 445 (2011)
https://doi.org/10.1179/026708409X12490360425846
Experimental validation of simulated fatigue life estimates in laser‐peened aluminum
Thomas J. Spradlin, Goran Ivetic, Ramana V. Grandhi and Kristina LangerInternational Journal of Structural Integrity 2 (1) 74 (2011)
https://doi.org/10.1108/17579861111108635
159 (2011)
https://doi.org/10.1002/9781118010570.ch6
Parametric Study on Single Shot and Overlapping Laser Shock Peening on Various Metals via Modeling and Experiments
Yunfeng Cao, Yung C. Shin and Benxin WuJournal of Manufacturing Science and Engineering 132 (6) (2010)
https://doi.org/10.1115/1.4002850
Effects of Temperature on Laser Shock Induced Plastic Deformation: The Case of Copper
Chang Ye and Gary J. ChengJournal of Manufacturing Science and Engineering 132 (6) (2010)
https://doi.org/10.1115/1.4002849
Numerical modeling of laser shock peening with femtosecond laser pulses and comparisons to experiments
Benxin Wu, Sha Tao and Shuting LeiApplied Surface Science 256 (13) 4376 (2010)
https://doi.org/10.1016/j.apsusc.2010.02.034
Dynamic Material Response of Aluminum Single Crystal Under Microscale Laser Shock Peening
Sinisa Vukelic, Youneng Wang, Jeffrey W. Kysar and Y. Lawrence YaoJournal of Manufacturing Science and Engineering 131 (3) (2009)
https://doi.org/10.1115/1.3106034
Numerical Analysis of Ultrashort Pulse Laser-Material Interaction Using ABAQUS
Dongkyun Lee and Elijah Kannatey-AsibuJournal of Manufacturing Science and Engineering 131 (2) (2009)
https://doi.org/10.1115/1.3075869
An Analytical Model to Predict Residual Stress Field Induced by Laser Shock Peening
Yongxiang Hu, Zhenqiang Yao and Jun HuJournal of Manufacturing Science and Engineering 131 (3) (2009)
https://doi.org/10.1115/1.3139219
Eigenstrain-based model for prediction of laser peening residual stresses in arbitrary three-dimensional bodies Part 1: Model description
A T DeWald and M R HillThe Journal of Strain Analysis for Engineering Design 44 (1) 1 (2009)
https://doi.org/10.1243/03093247JSA417
https://doi.org/10.1002/9780470459300.ch17
Grain boundary response of aluminum bicrystal under micro scale laser shock peening
Siniša Vukelić, Jeffrey W. Kysar and Y. Lawrence YaoInternational Journal of Solids and Structures 46 (18-19) 3323 (2009)
https://doi.org/10.1016/j.ijsolstr.2009.04.021
Overlapping rate effect on laser shock processing of 1045 steel by small spots with Nd:YAG pulsed laser
Yongxiang Hu and Zhenqiang YaoSurface and Coatings Technology 202 (8) 1517 (2008)
https://doi.org/10.1016/j.surfcoat.2007.07.008
Numerical simulation and experimentation of overlapping laser shock processing with symmetry cell
Yongxiang Hu and Zhenqiang YaoInternational Journal of Machine Tools and Manufacture 48 (2) 152 (2008)
https://doi.org/10.1016/j.ijmachtools.2007.08.021
Geometrical effects on residual stresses in 7050-T7451 aluminum alloy rods subject to laser shock peening
Chunhui Yang, Peter Damian Hodgson, Qianchu Liu and Lin YeJournal of Materials Processing Technology 201 (1-3) 303 (2008)
https://doi.org/10.1016/j.jmatprotec.2007.11.147
Handbook of Liquids-Assisted Laser Processing
Handbook of Liquids-Assisted Laser Processing 387 (2008)https://doi.org/10.1016/B978-008044498-7.50010-8
From Incident Laser Pulse to Residual Stress: A Complete and Self-Closed Model for Laser Shock Peening
Benxin Wu and Yung C. ShinJournal of Manufacturing Science and Engineering 129 (1) 117 (2007)
https://doi.org/10.1115/1.2386180
A one-dimensional hydrodynamic model for pressures induced near the coating-water interface during laser shock peening
Benxin Wu and Yung C. ShinJournal of Applied Physics 101 (2) (2007)
https://doi.org/10.1063/1.2426981
Numerical Investigation of Opposing Dual Sided Microscale Laser Shock Peening
Yajun Fan, Youneng Wang, Sinisa Vukelic and Y. Lawrence YaoJournal of Manufacturing Science and Engineering 129 (2) 256 (2007)
https://doi.org/10.1115/1.2540771
Laser peening and shot peening effects on fatigue life and surface roughness of friction stir welded 7075‐T7351 aluminum
OMAR HATAMLEH, JED LYONS and ROYCE FORMANFatigue & Fracture of Engineering Materials & Structures 30 (2) 115 (2007)
https://doi.org/10.1111/j.1460-2695.2006.01093.x
3-D FEM simulation of laser shock processing
Yongxiang Hu, Zhenqiang Yao and Jun HuSurface and Coatings Technology 201 (3-4) 1426 (2006)
https://doi.org/10.1016/j.surfcoat.2006.02.018
Dynamic Analysis of Residual Stress Introduced by Laser Peening
Koichi Akita, Masatoshi Kuroda and Philip J. WithersMaterials Science Forum 524-525 135 (2006)
https://doi.org/10.4028/www.scientific.net/MSF.524-525.135
Wave-solid interactions in laser-shock-induced deformation processes
Y. Fan, Y. Wang, S. Vukelic and Y. L. YaoJournal of Applied Physics 98 (10) 104904 (2005)
https://doi.org/10.1063/1.2134882
1003 (2005)
https://doi.org/10.2351/1.5060404