Determination of momentum as a mean of quantifying the mechanical energy delivered by droplets during MIG/MAG welding
Eur. Phys. J. Appl. Phys., 45 1 (2009) 11201
Published online: 2009-01-16
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Study on the Effect of Pulse Waveform Parameters on Droplet Transition, Dynamic Behavior of Weld Pool, and Weld Microstructure in P-GMAW
Jie Huang, Tao Chen, Daqing Huang and Tengzhou XuMetals 13 (2) 199 (2023)
https://doi.org/10.3390/met13020199
Detection and characterization of metal transfer in GMAW using computational vision algorithms
Jorge Luis Ortiz Solano, Andrés Mauricio Moreno-Uribe, Brayan Rene Acevedo Jaimes, Marcelo Pompermaier Okuyama, Ariel Rodríguez Arias and Régis Henrique Gonçalves e SilvaThe International Journal of Advanced Manufacturing Technology 128 (7-8) 3415 (2023)
https://doi.org/10.1007/s00170-023-12180-9
The potential of wire feed pulsation to influence factors that govern weld penetration in GMA welding
Vinicius Lemes Jorge, Fernando Matos Scotti, Ruham Pablo Reis and Américo ScottiThe International Journal of Advanced Manufacturing Technology 110 (9-10) 2685 (2020)
https://doi.org/10.1007/s00170-020-06037-8
Comparing CW-GMAW in direct current electrode positive (DCEP) and direct current electrode negative (DCEN)
P. D. C. Assunção, R. A. Ribeiro, E. B. F. Dos Santos, E. M. Braga and A. P. GerlichThe International Journal of Advanced Manufacturing Technology 104 (5-8) 2899 (2019)
https://doi.org/10.1007/s00170-019-04175-2
Effect of pulsing parameters on drop transfer dynamics and heat transfer behavior in pulsed gas metal arc welding
Yangyang Zhao, Phill-Seung Lee and Hyun ChungInternational Journal of Heat and Mass Transfer 129 1110 (2019)
https://doi.org/10.1016/j.ijheatmasstransfer.2018.10.037
A contribution to the study of negative polarity in GMA welding
Peigang Li, Kjell Hurtig, Mats Högström, Lars-Erik Svensson and Americo ScottiThe International Journal of Advanced Manufacturing Technology 95 (5-8) 2543 (2018)
https://doi.org/10.1007/s00170-017-1349-z
Pulse profile and metal transfer in pulsed gas metal arc welding: droplet formation, detachment and velocity
Emanuel B. F. Dos Santos, Rob Pistor and Adrian P. GerlichScience and Technology of Welding and Joining 22 (7) 627 (2017)
https://doi.org/10.1080/13621718.2017.1288889
Assessment of controlled short-circuiting application in filling passes with MIG/MAG double-wire process
Dumitru Caimacan, Andrii Mishchenko and Américo ScottiWelding International 31 (2) 90 (2017)
https://doi.org/10.1080/09507116.2016.1218604
Influence of current on the gross fusion efficiency in MIG/MAG welding
Edson Kazuo Hirata, Luiz Felipe Beltzac, Paulo César Okimoto and Américo ScottiWelding International 30 (7) 504 (2016)
https://doi.org/10.1080/09507116.2015.1096504
Investigation on droplet momentum in VPPA-GMAW hybrid welding of aluminum alloys
Haitao Hong, Yongquan Han, Maohua Du and Jiahui TongThe International Journal of Advanced Manufacturing Technology 86 (5-8) 2301 (2016)
https://doi.org/10.1007/s00170-016-8381-2
Avaliação do Uso de Curto-Circuito Controlado em Soldagens de Passes de Enchimento por MIG/MAG Duplo Arame
Dumitru Caimacan, Andrii Mishchenko and Américo ScottiSoldagem & Inspeção 20 (1) 16 (2015)
https://doi.org/10.1590/0104-9224/SI2001.03
Influence of the CO2 content on operational performance of short-circuit GMAW
Olga Liskevych and Américo ScottiWelding in the World 59 (2) 217 (2015)
https://doi.org/10.1007/s40194-014-0196-x
Influência da corrente sobre o rendimento bruto de fusão em soldagem MIG/MAG
Edson Kazuo Hirata, Luiz Felipe Beltzac, Paulo César Okimoto and Américo ScottiSoldagem & Inspeção 19 (2) 159 (2014)
https://doi.org/10.1590/0104-9224/SI1902.08
A scientific application oriented classification for metal transfer modes in GMA welding
Américo Scotti, Vladimir Ponomarev and William LucasJournal of Materials Processing Technology 212 (6) 1406 (2012)
https://doi.org/10.1016/j.jmatprotec.2012.01.021
Influence of welding current in plasma–MIG weld process on the bead weld geometry and wire fusion rate
Andre Alves de Resende, Valtair Antonio Ferraresi, Americo Scotti and Jair Carlos DutraWelding International 25 (12) 910 (2011)
https://doi.org/10.1080/09507116.2010.527481
Uma metodologia para análises comparativas da capacidade produtiva entre arames maciços (MIG/MAG) e tubulares (eletrodo tubular)
Regina Paula Garcia and Américo ScottSoldagem & Inspeção 16 (2) 146 (2011)
https://doi.org/10.1590/S0104-92242011000200007
Influência das correntes de soldagem do processo plasma-MIG sobre a geometria do cordão de solda e taxa de fusão do arame
André Alves de Resende, Valtair Antonio Ferraresi, Américo Scotti and Jair Carlos DutraSoldagem & Inspeção 14 (4) 320 (2009)
https://doi.org/10.1590/S0104-92242009000400006
Determination of the momentum of droplets impinging on the pool during aluminium GMAW
Américo Scotti and Carlos Eduardo Aguiar Lima RodriguesSoldagem & Inspeção 14 (4) 336 (2009)
https://doi.org/10.1590/S0104-92242009000400008