Surface treatment of a polypropylene film with a nitrogen DBD at medium pressure
Eur. Phys. J. Appl. Phys., 43 3 (2008) 289-294
Published online: 2008-04-30
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Increasing the biocompatibility of PEEK through O2/H2 low-pressure plasma treatment in vitro
Shengxin Weng, Franziska Schmidt, Weiwei Shi, Jamila Yassine, Johannes Schmidt and Andreas Dominik SchwitallaMaterials Today Communications 47 113154 (2025)
https://doi.org/10.1016/j.mtcomm.2025.113154
Filament Analysis Based on Mathematical Morphology of Surface Dielectric Barrier Discharges in N2/O2 Mixtures
Takuma Uemura, Atsushi Komuro and Ryo OnoIEEJ Transactions on Fundamentals and Materials 144 (1) 29 (2024)
https://doi.org/10.1541/ieejfms.144.29
Temporal Changes in the Surface Chemistry and Topography of Reactive Ion Plasma-Treated Poly(vinyl alcohol) Alter Endothelialization Potential
Ryan A. Faase, Novella M. Keeling, Justin S. Plaut, Christian Leycam, Gabriela Acevedo Munares, Monica T. Hinds, Joe E. Baio and Patrick L. JurneyACS Applied Materials & Interfaces 16 (1) 389 (2024)
https://doi.org/10.1021/acsami.3c16759
Observation and Characterization of Vibrationally Active Surface Species Accessed with Nonthermal Nitrogen Plasmas
Garam Lee, Chang Yan, William F. Schneider, David B. Go and Casey P. O’BrienACS Applied Materials & Interfaces 16 (4) 4561 (2024)
https://doi.org/10.1021/acsami.3c14965
Filament analysis based on mathematical morphology of surface dielectric barrier discharges in N2/O2 mixtures
Takuma Uemura, Atsushi Komuro and Ryo OnoElectrical Engineering in Japan 217 (1) (2024)
https://doi.org/10.1002/eej.23461
Surface modification of polymers by 50 Hz dielectric barrier discharge (DBD) plasma produced in air at 40 Torr
Deepak Prasad Subedi, Rajesh Prakash Guragain and Ujjwal Man JoshiFundamental Plasma Physics 10 100058 (2024)
https://doi.org/10.1016/j.fpp.2024.100058
Effect of nitrogen/oxygen ratios on surface charge distributions generated by repetitive surface dielectric barrier discharges
Takuma Uemura, Hiroyuki Nishida, Ryo Ono and Atsushi KomuroPlasma Sources Science and Technology 33 (6) 065011 (2024)
https://doi.org/10.1088/1361-6595/ad5400
Non-Thermal Plasma Decontamination Using a Multi-Hollow Surface Dielectric Barrier Discharge: Impact of Food Matrix Composition on Bactericidal Efficacy
Klaas De Baerdemaeker, Amber Van Reepingen, Anton Nikiforov, Bruno De Meulenaer, Nathalie De Geyter and Frank DevlieghereFoods 12 (2) 386 (2023)
https://doi.org/10.3390/foods12020386
Plasma Surface Engineering of Natural and Sustainable Polymeric Derivatives and Their Potential Applications
Renjith Rajan Pillai and Vinoy ThomasPolymers 15 (2) 400 (2023)
https://doi.org/10.3390/polym15020400
Unraveling Exclusive In-Plasma Initiated Oxidation Processes Occurring at Polymeric Surfaces upon O2 Admixtures to Medium Pressure Ar and N2 DBD Treatments
Rouba Ghobeira, Parinaz Saadat Esbah Tabaei, Anton Nikiforov, Rino Morent and Nathalie De GeyterPolymers 15 (14) 2978 (2023)
https://doi.org/10.3390/polym15142978
Enhanced Adhesion of Electrospun Polycaprolactone Nanofibers to Plasma-Modified Polypropylene Fabric
Lucie Janů, Eva Dvořáková, Kateřina Polášková, et al.Polymers 15 (7) 1686 (2023)
https://doi.org/10.3390/polym15071686
Plasma etching effect on the molecular structure of chitosan-based hydrogels and its biological properties
Juncong Xu, Yaoyuan Li, Jingwen Yang, Subin Zhou and Wenbei SituInternational Journal of Biological Macromolecules 230 123257 (2023)
https://doi.org/10.1016/j.ijbiomac.2023.123257
Effects of in-package atmospheric dielectric barrier discharge cold plasma treatment on the antimicrobial efficacy of whey protein isolate-based edible films that incorporate malic acid against Salmonella in chicken breast processed meat
Ye Jeong Jeon, Hyewon Lee and Sea C. MinInnovative Food Science & Emerging Technologies 85 103339 (2023)
https://doi.org/10.1016/j.ifset.2023.103339
Modification and improvement of biodegradable packaging films by cold plasma; a critical review
Roya Bahrami, Rezvan Zibaei, Zahra Hashami, Sara Hasanvand, Farhad Garavand, Milad Rouhi, Seid Mahdi Jafari and Reza MohammadiCritical Reviews in Food Science and Nutrition 62 (7) 1936 (2022)
https://doi.org/10.1080/10408398.2020.1848790
Interfacial properties of multicomponent plasma‐modified high‐performance fiber‐reinforced composites: A review
Chunyue Fang, Yuhan Zhou, Lixia Jia and Ruosi YanPolymer Composites 43 (8) 4866 (2022)
https://doi.org/10.1002/pc.26870
Enhanced culturing of adipose derived mesenchymal stem cells on surface modified polystyrene Petri dishes fabricated by plasma enhanced chemical vapor deposition system
Hyuna Lim, Yoonsoo Park, Sujeong Jang, Heonyong Park, Yong Ki Cho and Donggeun JungJournal of Biomedical Materials Research Part B: Applied Biomaterials 110 (2) 358 (2022)
https://doi.org/10.1002/jbm.b.34912
Role of excimer formation and induced photoemission on the Ar metastable kinetics in atmospheric pressure Ar–NH3 dielectric barrier discharges
Raphaël Robert, Gerjan Hagelaar, Nader Sadeghi, et al.Plasma Sources Science and Technology 31 (6) 065010 (2022)
https://doi.org/10.1088/1361-6595/ac7748
Plasma Modification of Polyolefins
Mehrnoush Narimisa, Rouba Ghobeira, Yuliia Onyshchenko, et al.Engineering Materials, Plasma Modification of Polyolefins 15 (2022)
https://doi.org/10.1007/978-3-030-52264-3_2
Chemical characterization of plasma-activated polymeric surfaces via XPS analyses: A review
Rouba Ghobeira, Parinaz Saadat Esbah Tabaei, Rino Morent and Nathalie De GeyterSurfaces and Interfaces 31 102087 (2022)
https://doi.org/10.1016/j.surfin.2022.102087
Polylactic Acid/Polyaniline Nanofibers Subjected to Pre- and Post-Electrospinning Plasma Treatments for Refined Scaffold-Based Nerve Tissue Engineering Applications
Yongjian Guo, Rouba Ghobeira, Sheida Aliakbarshirazi, Rino Morent and Nathalie De GeyterPolymers 15 (1) 72 (2022)
https://doi.org/10.3390/polym15010072
Corn starch based films treated by dielectric barrier discharge plasma
Mayara Lima Goiana, Edy Sousa de Brito, Elenilson Godoy Alves Filho, et al.International Journal of Biological Macromolecules 183 2009 (2021)
https://doi.org/10.1016/j.ijbiomac.2021.05.210
Combinatorial effects of coral addition and plasma treatment on the properties of chitosan/polyethylene oxide nanofibers intended for bone tissue engineering
Parinaz Saadat Esbah Tabaei, Mahtab Asadian, Rouba Ghobeira, et al.Carbohydrate Polymers 253 117211 (2021)
https://doi.org/10.1016/j.carbpol.2020.117211
Strategies of Power Measurement and Energy Coupling Enhancement in Nanosecond Pulsed Coaxial Dielectric Barrier Discharges
Han Bai, Bangdou Huang, Cheng Zhang and Tao ShaoIEEE Transactions on Plasma Science 49 (5) 1605 (2021)
https://doi.org/10.1109/TPS.2021.3073530
Plasma-Induced Hemi-Wicking on Sanded Polymer Surfaces
Po-Hsien Chiu, Ching-Jung Wu, Chun-Ping Hsiao, Chih-Tung Liu, Mu-Chien Wu and Jong-Shinn WuCoatings 11 (8) 871 (2021)
https://doi.org/10.3390/coatings11080871
Enhancement of metal adhesion, owing to the plasma texturing of PEEK
David Gravis, Grégoire Rigolé, Mayssa Yengui, Wolfgang Knapp, Jean‐François Coulon and Fabienne Poncin‐EpaillardPlasma Processes and Polymers 18 (6) (2021)
https://doi.org/10.1002/ppap.202100009
Correlation between the surface chemistry, the surface free energy and the adhesion of metallic coatings onto plasma-treated Poly(ether ether ketone)
David Gravis, Fabienne Poncin-Epaillard and Jean-François CoulonApplied Surface Science 501 144242 (2020)
https://doi.org/10.1016/j.apsusc.2019.144242
Impact of the pre-deposited surface charge on the breakdown in a dielectric barrier discharge in the air
Y Akishev, V Karalnik, A Petryakov, T Shao and C ZhangJournal of Physics: Conference Series 1696 (1) 012022 (2020)
https://doi.org/10.1088/1742-6596/1696/1/012022
Comparative study between in-plasma and post-plasma chemical processes occurring at the surface of UHMWPE subjected to medium pressure Ar and N2 plasma activation
Parinaz Saadat Esbah Tabaei, Rouba Ghobeira, Pieter Cools, et al.Polymer 193 122383 (2020)
https://doi.org/10.1016/j.polymer.2020.122383
Modifications of protein-based films using cold plasma
Motahareh Hashemi Moosavi, Mohammad Reza Khani, Babak Shokri, et al.International Journal of Biological Macromolecules 142 769 (2020)
https://doi.org/10.1016/j.ijbiomac.2019.10.017
Experimental study on the effects of airflow, magnetic field and combination of airflow with magnetic field on nanosecond pulsed dielectric barrier discharge in atmospheric air
Hongfei Guo, Yongfeng Xu, Yuying Wang and Chunsheng RenPhysics of Plasmas 27 (2) (2020)
https://doi.org/10.1063/1.5117885
The effect of atmospheric pressure plasma treatment (APPT) on the adhesive bonding of poly(methyl methacrylate) (PMMA)-to-glass using a polydimethylsiloxane (PDMS)-based adhesive
V. Bagiatis, G.W. Critchlow, D. Price and S. WangInternational Journal of Adhesion and Adhesives 95 102405 (2019)
https://doi.org/10.1016/j.ijadhadh.2019.102405
31 (2019)
https://doi.org/10.1002/9783527819249.ch2
Controlling Cell Behavior through the Design of Biomaterial Surfaces: A Focus on Surface Modification Techniques
Hamed Amani, Hamidreza Arzaghi, Mehrdad Bayandori, Amin Shiralizadeh Dezfuli, Hamidreza Pazoki‐Toroudi, Abbas Shafiee and Lida MoradiAdvanced Materials Interfaces 6 (13) (2019)
https://doi.org/10.1002/admi.201900572
Effects of additives on atmospheric pressure gliding arc applied to the modification of polypropylene
P. Jelínek, K. Polášková, F. Jeník, et al.Surface and Coatings Technology 372 45 (2019)
https://doi.org/10.1016/j.surfcoat.2019.04.035
Effects of a dielectric barrier discharge (DBD) treatment on chitosan/polyethylene oxide nanofibers and their cellular interactions
Mahtab Asadian, Iuliia Onyshchenko, Monica Thukkaram, et al.Carbohydrate Polymers 201 402 (2018)
https://doi.org/10.1016/j.carbpol.2018.08.092
Comparison of Surface Modification of CR-39 Polymer Film Using RF and DC Glow Discharges Plasma
Mohamed Hassouba and Nagia DawoodJournal of Modern Physics 08 (12) 2021 (2017)
https://doi.org/10.4236/jmp.2017.812122
Effects of Dielectric Barrier Discharges (DBD) Cold Plasma Treatment on Physicochemical and Structural Properties of Zein Powders
Shuang Dong, Ang Gao, Hui Xu and Ye ChenFood and Bioprocess Technology 10 (3) 434 (2017)
https://doi.org/10.1007/s11947-016-1814-y
Influence of ethanol vapor addition on the surface modification of polyethylene in a dielectric barrier discharge
Annick Van Deynse, Rino Morent, Christophe Leys and Nathalie De GeyterApplied Surface Science 419 847 (2017)
https://doi.org/10.1016/j.apsusc.2017.05.111
Surface and bulk properties improvement of HDPE by a batch plasma treatment
Mintra Meemusaw and Rathanawan MagaraphanJournal of Applied Polymer Science 133 (7) (2016)
https://doi.org/10.1002/app.43011
Improvement of adhesion strength of self-adhesive silicone rubber on thermoplastic substrates – Comparison of an atmospheric pressure plasma jet (APPJ) and a Pyrosil® flame
V. Seitz, K. Arzt, S. Mahnel, et al.International Journal of Adhesion and Adhesives 66 65 (2016)
https://doi.org/10.1016/j.ijadhadh.2015.12.009
Cold Oxygen Plasma Treatments for the Improvement of the Physicochemical and Biodegradable Properties of Polylactic Acid Films for Food Packaging
Ah Young Song, Yoon Ah Oh, Si Hyeon Roh, Ji Hyeon Kim and Sea C. MinJournal of Food Science 81 (1) (2016)
https://doi.org/10.1111/1750-3841.13172
Cold plasma treatments for improvement of the applicability of defatted soybean meal-based edible film in food packaging
Yoon Ah Oh, Si Hyeon Roh and Sea C. MinFood Hydrocolloids 58 150 (2016)
https://doi.org/10.1016/j.foodhyd.2016.02.022
He/O2 Atmospheric Pressure Plasma Jet Treatments of PCL Scaffolds for Tissue Engineering and Regenerative Medicine
Ilaria Trizio, Francesca Intranuovo, Roberto Gristina, Giorgio Dilecce and Pietro FaviaPlasma Processes and Polymers 12 (12) 1451 (2015)
https://doi.org/10.1002/ppap.201500104
Cold Plasma Treatment Effects on the Physicochemical and Biodegradable Properties of a Corn Biomass-containing Polyester Film
Ah Young Song, Yoon Ah Oh, Se Jun Oh and Sea Cheol MinKorean Journal of Food Science and Technology 47 (2) 224 (2015)
https://doi.org/10.9721/KJFST.2015.47.2.224
Nanomechanical properties of plasma treated polylactic acid
E. P. Koumoulos, M. Valentin, D. A. Dragatogiannis, et al.Plastics, Rubber and Composites 44 (8) 322 (2015)
https://doi.org/10.1179/1743289815Y.0000000023
Influence of ambient conditions on the aging behavior of plasma-treated polyethylene surfaces
Annick Van Deynse, Pieter Cools, Christophe Leys, Rino Morent and Nathalie De GeyterSurface and Coatings Technology 258 359 (2014)
https://doi.org/10.1016/j.surfcoat.2014.08.073
Adhesion strength behaviour of plasma pre-treated and laminated polypropylene nonwoven fabrics using acrylic and polyurethane-based adhesives
Osman Gazi Armağan, Burcak Karaguzel Kayaoglu, Hale Canbaz Karakas and Fatma Seniha GunerJournal of Industrial Textiles 43 (3) 396 (2014)
https://doi.org/10.1177/1528083712458303
Influence of Water Vapor Addition on the Surface Modification of Polyethylene in an Argon Dielectric Barrier Discharge
Annick Van Deynse, Nathalie De Geyter, Christophe Leys and Rino MorentPlasma Processes and Polymers 11 (2) 117 (2014)
https://doi.org/10.1002/ppap.201300088
Study of thermo-oxidative chemical pre-treatment of isotactic polypropylene
Rasa Alaburdaitė and Valentina KrylovaJournal of Thermal Analysis and Calorimetry 118 (2) 1331 (2014)
https://doi.org/10.1007/s10973-014-4226-0
Enhanced cell–material interactions on medium‐pressure plasma‐treated polyhydroxybutyrate/polyhydroxyvalerate
Tinneke Jacobs, Heidi Declercq, Nathalie De Geyter, Ria Cornelissen, Peter Dubruel, Christophe Leys, Arnaud Beaurain, Edmond Payen and Rino MorentJournal of Biomedical Materials Research Part A 101A (6) 1778 (2013)
https://doi.org/10.1002/jbm.a.34459
Influence of dielectric barrier discharge atmosphere on polylactic acid (PLA) surface modification
N. De GeyterSurface and Coatings Technology 214 69 (2013)
https://doi.org/10.1016/j.surfcoat.2012.11.004
Effects of plasma surface treatments of diamond-like carbon and polymeric substrata on the cellular behavior of human fibroblasts
Carmen López-Santos, Mar Fernández-Gutiérrez, Francisco Yubero, Blanca Vazquez-Lasa, José Cotrino, Agustín González-Elipe and Julio San RománJournal of Biomaterials Applications 27 (6) 669 (2013)
https://doi.org/10.1177/0885328211422832
Improved cell adhesion to flat and porous plasma-treated poly-ε-caprolactone samples
Tinneke Jacobs, Heidi Declercq, Nathalie De Geyter, et al.Surface and Coatings Technology 232 447 (2013)
https://doi.org/10.1016/j.surfcoat.2013.06.001
Surface Modification of Poly-ε-Caprolactone with an Atmospheric Pressure Plasma Jet
N. De Geyter, A. Sarani, T. Jacobs, et al.Plasma Chemistry and Plasma Processing 33 (1) 165 (2013)
https://doi.org/10.1007/s11090-012-9419-3
Plasma surface modification of polylactic acid to promote interaction with fibroblasts
Tinneke Jacobs, Heidi Declercq, Nathalie De Geyter, et al.Journal of Materials Science: Materials in Medicine 24 (2) 469 (2013)
https://doi.org/10.1007/s10856-012-4807-z
Aging of plasma treated surfaces and their effects on platelet adhesion and activation
Martina Modic, Ita Junkar, Alenka Vesel and Miran MozeticSurface and Coatings Technology 213 98 (2012)
https://doi.org/10.1016/j.surfcoat.2012.10.026
Plasma Surface Modification of Biomedical Polymers: Influence on Cell-Material Interaction
Tinneke Jacobs, Rino Morent, Nathalie De Geyter, Peter Dubruel and Christophe LeysPlasma Chemistry and Plasma Processing 32 (5) 1039 (2012)
https://doi.org/10.1007/s11090-012-9394-8
Adsorption of protein streptavidin to the plasma treated surface of polystyrene
Alenka Vesel and Kristina ElersicApplied Surface Science 258 (15) 5558 (2012)
https://doi.org/10.1016/j.apsusc.2011.12.131
‘Memory’ and sustention of microdischarges in a steady-state DBD: volume plasma or surface charge?
Yuri Akishev, Gregory Aponin, Anton Balakirev, et al.Plasma Sources Science and Technology 20 (2) 024005 (2011)
https://doi.org/10.1088/0963-0252/20/2/024005
Plasma treatment of polycaprolactone at medium pressure
Tinneke Jacobs, Nathalie De Geyter, Rino Morent, et al.Surface and Coatings Technology 205 S543 (2011)
https://doi.org/10.1016/j.surfcoat.2011.02.012
Plasma modification of PET foils with different crystallinity
Tinneke Jacobs, Nathalie De Geyter, Rino Morent, et al.Surface and Coatings Technology 205 S511 (2011)
https://doi.org/10.1016/j.surfcoat.2011.01.029
Autohesion of plasma treated semi-crystalline PEEK: Comparative study of argon, nitrogen and oxygen treatments
Shengnan Zhang, Firas Awaja, Natalie James, David R. McKenzie and Andrew J. RuysColloids and Surfaces A: Physicochemical and Engineering Aspects 374 (1-3) 88 (2011)
https://doi.org/10.1016/j.colsurfa.2010.11.013
Role of the volume and surface breakdown in a formation of microdischarges in a steady-state DBD
Y. S. Akishev, G. Aponin, A. Balakirev, et al.The European Physical Journal D 61 (2) 421 (2011)
https://doi.org/10.1140/epjd/e2010-10219-7
Nitrogen plasma functionalization of low density polyethylene
Carmen López-Santos, Francisco Yubero, José Cotrino and Agustín R. González-ElipeSurface and Coatings Technology 205 (11) 3356 (2011)
https://doi.org/10.1016/j.surfcoat.2010.11.038
Plasma Surface Modification of Biodegradable Polymers: A Review
Rino Morent, Nathalie De Geyter, Tim Desmet, Peter Dubruel and Christophe LeysPlasma Processes and Polymers 8 (3) 171 (2011)
https://doi.org/10.1002/ppap.201000153
Influence of successive plasma treatments on PP foils
T Jacobs, R Morent, N De Geyter and C LeysJournal of Physics: Conference Series 275 012018 (2011)
https://doi.org/10.1088/1742-6596/275/1/012018
Effect of humid air exposure between successive helium plasma treatments on PET foils
T. Jacobs, R. Morent, N. De Geyter, et al.Surface and Coatings Technology 205 (7) 2256 (2010)
https://doi.org/10.1016/j.surfcoat.2010.09.001
Modification of Hydrophilic Property of Polypropylene Films by a Parallel-Plate Nitrogen-Based Dielectric Barrier Discharge Jet
Ming-Hung Chiang, Kuo-Chi Liao, I-Min Lin, et al.IEEE Transactions on Plasma Science 38 (6) 1489 (2010)
https://doi.org/10.1109/TPS.2010.2045769
Influence of Discharge Atmosphere on the Ageing Behaviour of Plasma-Treated Polylactic Acid
R. Morent, N. De Geyter, M. Trentesaux, et al.Plasma Chemistry and Plasma Processing 30 (4) 525 (2010)
https://doi.org/10.1007/s11090-010-9233-8
Plasma modification of polylactic acid in a medium pressure DBD
N. De Geyter, R. Morent, T. Desmet, et al.Surface and Coatings Technology 204 (20) 3272 (2010)
https://doi.org/10.1016/j.surfcoat.2010.03.037
Stability study of polyacrylic acid films plasma-polymerized on polypropylene substrates at medium pressure
Rino Morent, Nathalie De Geyter, Martine Trentesaux, et al.Applied Surface Science 257 (2) 372 (2010)
https://doi.org/10.1016/j.apsusc.2010.06.080
Surface Functionalization, Oxygen Depth Profiles, and Wetting Behavior of PET Treated with Different Nitrogen Plasmas
Carmen López-Santos, Francisco Yubero, José Cotrino and Agustín R. González-ElipeACS Applied Materials & Interfaces 2 (4) 980 (2010)
https://doi.org/10.1021/am100052w
Incorporation of poly(N-isopropylacrylamide)/chitosan microgel onto plasma functionalized cotton fibre surface
Audrey Tourrette, Nathalie De Geyter, Dragan Jocic, et al.Colloids and Surfaces A: Physicochemical and Engineering Aspects 352 (1-3) 126 (2009)
https://doi.org/10.1016/j.colsurfa.2009.10.014
Deposition of Polyacrylic Acid Films by Means of an Atmospheric Pressure Dielectric Barrier Discharge
Rino Morent, Nathalie De Geyter, Sandra Van Vlierberghe, et al.Plasma Chemistry and Plasma Processing 29 (2) 103 (2009)
https://doi.org/10.1007/s11090-009-9167-1