EDP Sciences logo
Subscriber Authentication Point
Search
Menu
All issues Eur. Phys. J. AP, 17 1 (2002) 25-28 Article references

Articles citing this article

The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).

Cited article:

Detecting Near-Surface Sub-Millimeter Voids in Additively Manufactured Ti-5V-5Al-5Mo-3Cr Alloy Using a Transmit-Receive Eddy Current Probe

Brendan Sungjin Halliday, Allyson Eastmure, Peter Ross Underhill and Thomas Walter Krause
Sensors 24 (13) 4183 (2024)
https://doi.org/10.3390/s24134183

Estimation of the Pose of a Triple-Coil Sensor Above a Planar Conductor

Xue Bai, Zihan Xia, Yuchun Shao, Junshi Li, Tian Meng and Wuliang Yin
IEEE Transactions on Instrumentation and Measurement 73 1 (2024)
https://doi.org/10.1109/TIM.2024.3470035

Electromagnetic Induction Imaging at Multiple Depths With a Single Coil

Mahindra Ganesh, Maryam Ravan and Reza K. Amineh
IEEE Transactions on Instrumentation and Measurement 70 1 (2021)
https://doi.org/10.1109/TIM.2021.3050659

Investigation on Time-to-Peak Feature Insensitive to Liftoff Effect for Pulsed Eddy Current Evaluation

Panpan Yang, Mengbao Fan, Binghua Cao and Shang Gao
IEEE Transactions on Instrumentation and Measurement 69 (7) 5064 (2020)
https://doi.org/10.1109/TIM.2019.2954011

Accurate measurements of plate thickness with variable lift-off using a combined inductive and capacitive sensor

Jorge R. Salas Avila, Mingyang Lu, Ruochen Huang, et al.
NDT & E International 110 102202 (2020)
https://doi.org/10.1016/j.ndteint.2019.102202

Generation of tailored subsurface zones in steels containing metastable austenite by adaptive machining and validation by eddy current testing

Lara Vivian Fricke, Hai Nam Nguyen, Bernd Breidenstein, et al.
tm - Technisches Messen 87 (11) 704 (2020)
https://doi.org/10.1515/teme-2020-0045

The Improvement of Flaw Detection by the Configuration of Uniform Eddy Current Probes

Ageng S. Repelianto and Naoya Kasai
Sensors 19 (2) 397 (2019)
https://doi.org/10.3390/s19020397

Comparison of time and frequency domain features’ immunity against lift-off in pulse-compression eddy current imaging

Luigi Ferrigno, Marco Laracca, Hamed Malekmohammadi, Gui Yun Tian and Marco Ricci
NDT & E International 107 102152 (2019)
https://doi.org/10.1016/j.ndteint.2019.102152

A Temperature Drift Compensation Method for Pulsed Eddy Current Technology

Biting Lei, Pengxing Yi, Yahui Li and Jiayun Xiang
Sensors 18 (6) 1952 (2018)
https://doi.org/10.3390/s18061952

Multi-source effect in magnetizing-based eddy current testing sensor for surface crack in ferromagnetic materials

Zhiyang Deng, Yihua Kang, Jikai Zhang and Kai Song
Sensors and Actuators A: Physical 271 24 (2018)
https://doi.org/10.1016/j.sna.2018.01.009

Advances in Capacitive, Eddy Current, and Magnetic Displacement Sensors and Corresponding Interfaces

Boby George, Zhichao Tan and Stoyan Nihtianov
IEEE Transactions on Industrial Electronics 64 (12) 9595 (2017)
https://doi.org/10.1109/TIE.2017.2726982

Precise on-machine extraction of the surface normal vector using an eddy current sensor array

Yongqing Wang, Meng Lian, Haibo Liu, Yangwei Ying and Xianjun Sheng
Measurement Science and Technology 27 (11) 115016 (2016)
https://doi.org/10.1088/0957-0233/27/11/115016

A Surface Normal On-Machine Measuring Method Using Eddy-Current (EC) Sensor Array

Meng Lian, Hai Bo Liu, Yong Qing Wang, et al.
International Journal of Automation Technology 10 (6) 977 (2016)
https://doi.org/10.20965/ijat.2016.p0977

A coupled fictitious electric circuit's method for impedance of a sensor with ferromagnetic core calculation. Application to eddy currents non destructive testing

S. Zerguini, B. Maouche, M. Latreche and M. Feliachi
The European Physical Journal Applied Physics 48 (3) 31202 (2009)
https://doi.org/10.1051/epjap/2009190

Vibrations of probe used for the defect detection of helical heating tubes in a fast breeder reactor

Takumi Inoue, Atsuo Sueoka, Takeshi Maehara, Yutaka Nakano and Hiroyuki Kanemoto
Nuclear Engineering and Design 238 (6) 1459 (2008)
https://doi.org/10.1016/j.nucengdes.2007.11.002

Improved immunity to lift-off effect in pulsed eddy current testing with two-stage differential probes

L. Shu, H. Songling, Z. Wei and Y. Peng
Russian Journal of Nondestructive Testing 44 (2) 138 (2008)
https://doi.org/10.1134/S1061830908020095

Vibrations of probe used for the defect detection of helical heating tubes in a fast breeder reactor

Takumi Inoue, Atsuo Sueoka, Takeshi Maehara, Yutaka Nakano and Hiroyuki Kanemoto
Nuclear Engineering and Design 237 (8) 868 (2007)
https://doi.org/10.1016/j.nucengdes.2006.11.003