Application of the laser spallation technique to the measurement of the adhesion strength of tungsten carbide coatings on superalloy substrates
Eur. Phys. J. AP, 12 1 (2000) 47-53
Published online: 2000-10-15
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
269 (2018)
https://doi.org/10.1002/9781119185031.ch7
Evaluation techniques and improvements of adhesion strength for TiN coating in tool applications: a review
M.F. Othman, A.R. Bushroa and Wan Normimi Roslini AbdullahJournal of Adhesion Science and Technology 29 (7) 569 (2015)
https://doi.org/10.1080/01694243.2014.997379
Modern Cold Spray
D. Christoulis and C. SarafoglouModern Cold Spray 275 (2015)
https://doi.org/10.1007/978-3-319-16772-5_7
Effect of Pulsed Laser Ablation and Continuous Laser Heating on the Adhesion and Cohesion of Cold Sprayed Ti-6Al-4V Coatings
M. Perton, S. Costil, W. Wong, et al.Journal of Thermal Spray Technology 21 (6) 1322 (2012)
https://doi.org/10.1007/s11666-012-9812-8
Science and Technology of Thin Film Adhesion
Akira KINBARAJournal of The Surface Finishing Society of Japan 63 (12) 710 (2012)
https://doi.org/10.4139/sfj.63.710
Cold-Spraying Coupled to Nano-Pulsed Nd-YaG Laser Surface Pre-treatment
D. K. Christoulis, S. Guetta, E. Irissou, et al.Journal of Thermal Spray Technology 19 (5) 1062 (2010)
https://doi.org/10.1007/s11666-010-9500-5
Bond strength determination of hydroxyapatite coatings on Ti‐6Al‐4V substrates using the LAser Shock Adhesion Test (LASAT)
Vincent Guipont, Michel Jeandin, Sebastien Bansard, Khiam Aik Khor, Mariette Nivard, Laurent Berthe, Jean‐Paul Cuq‐Lelandais and Michel BoustieJournal of Biomedical Materials Research Part A 95A (4) 1096 (2010)
https://doi.org/10.1002/jbm.a.32907
Optimization of micro-indentation conditions for evaluation of interfacial bond strength: A finite element approach
H. Zhang and D.Y. LiThin Solid Films 517 (17) 5259 (2009)
https://doi.org/10.1016/j.tsf.2009.03.123
Influence of Particle Velocity on Adhesion of Cold-Sprayed Splats
S. Guetta, M. H. Berger, F. Borit, et al.Journal of Thermal Spray Technology 18 (3) 331 (2009)
https://doi.org/10.1007/s11666-009-9327-0
An equation of state for anisotropic solids under shock loading
A. A. LukyanovThe European Physical Journal B 64 (2) 159 (2008)
https://doi.org/10.1140/epjb/e2008-00295-5
Evaluation of Adhesive Strength of Thermal-Sprayed Hydroxyapatite Coatings Using the LAser Shock Adhesion Test (LASAT)
Yuji Ichikawa, Sophie Barradas, François Borit, et al.MATERIALS TRANSACTIONS 48 (4) 793 (2007)
https://doi.org/10.2320/matertrans.48.793
Failure Strength Measurements of VPS Tungsten Coatings for HAPL First Wall Armor
Hyoungil Kim, Jaafar El-Awady, Jennifer Quan, et al.Fusion Science and Technology 52 (4) 875 (2007)
https://doi.org/10.13182/FST07-A1603
Adhesion Study of Cold-Sprayed CoNiCrAlY-Mo Coating of Inconel 625 Using the Laser Shock Adhesion Test (LASAT)
Y. Ichikawa, Kazuhiro Ogawa, M. Nivard, et al.Materials Science Forum 539-543 1086 (2007)
https://doi.org/10.4028/www.scientific.net/MSF.539-543.1086
Application of laser shock adhesion testing to the study of the interlamellar strength and coating–substrate adhesion in cold-sprayed copper coating of aluminum
S. Barradas, R. Molins, M. Jeandin, M. Arrigoni, M. Boustie, C. Bolis, L. Berthe and M. DucosSurface and Coatings Technology 197 (1) 18 (2005)
https://doi.org/10.1016/j.surfcoat.2004.08.222
P556 (2005)
https://doi.org/10.2351/1.5060606
P518 (2004)
https://doi.org/10.2351/1.5060367