EDP Sciences logo
Subscriber Authentication Point
Search
Menu
All issues Eur. Phys. J. AP, 6 1 (1999) 41-47 Article references

Articles citing this article

The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).

Cited article:

An FFT‐based method for computing weighted minimal surfaces in microstructures with applications to the computational homogenization of brittle fracture

Matti Schneider
International Journal for Numerical Methods in Engineering 121 (7) 1367 (2020)
https://doi.org/10.1002/nme.6270

A novel FFT-based phase field model for damage and cracking behavior of heterogeneous materials

Y.J. Cao, W.Q. Shen, J.F. Shao and W. Wang
International Journal of Plasticity 133 102786 (2020)
https://doi.org/10.1016/j.ijplas.2020.102786

A FFT-based numerical implementation of mesoscale field dislocation mechanics: Application to two-phase laminates

Komlan S. Djaka, Stéphane Berbenni, Vincent Taupin and Ricardo A. Lebensohn
International Journal of Solids and Structures 184 136 (2020)
https://doi.org/10.1016/j.ijsolstr.2018.12.027

A dynamical view of nonlinear conjugate gradient methods with applications to FFT-based computational micromechanics

Matti Schneider
Computational Mechanics 66 (1) 239 (2020)
https://doi.org/10.1007/s00466-020-01849-7

Topology design of 2D and 3D elastic material microarchitectures with crystal symmetries displaying isotropic properties close to their theoretical limits

R. Yera, N. Rossi, C.G. Méndez and A.E. Huespe
Applied Materials Today 18 100456 (2020)
https://doi.org/10.1016/j.apmt.2019.100456

Numerical technique for the 3D microarchitecture design of elastic composites inspired by crystal symmetries

N. Rossi, R. Yera, C.G. Méndez, S. Toro and A.E. Huespe
Computer Methods in Applied Mechanics and Engineering 359 112760 (2020)
https://doi.org/10.1016/j.cma.2019.112760

Fast implicit solvers for phase-field fracture problems on heterogeneous microstructures

Felix Ernesti, Matti Schneider and Thomas Böhlke
Computer Methods in Applied Mechanics and Engineering 363 112793 (2020)
https://doi.org/10.1016/j.cma.2019.112793

Topology optimization of fibers orientation in hyperelastic composite material

Andre Luis Ferreira da Silva, Ruben Andres Salas, Emilio Carlos Nelli Silva and J.N. Reddy
Composite Structures 231 111488 (2020)
https://doi.org/10.1016/j.compstruct.2019.111488

A fast Fourier transform-based mesoscale field dislocation mechanics study of grain size effects and reversible plasticity in polycrystals

Stéphane Berbenni, Vincent Taupin and Ricardo A. Lebensohn
Journal of the Mechanics and Physics of Solids 135 103808 (2020)
https://doi.org/10.1016/j.jmps.2019.103808

On Quasi‐Newton methods in fast Fourier transform‐based micromechanics

Daniel Wicht, Matti Schneider and Thomas Böhlke
International Journal for Numerical Methods in Engineering 121 (8) 1665 (2020)
https://doi.org/10.1002/nme.6283

FFT-based homogenisation accelerated by low-rank tensor approximations

Jaroslav Vondřejc, Dishi Liu, Martin Ladecký and Hermann G. Matthies
Computer Methods in Applied Mechanics and Engineering 364 112890 (2020)
https://doi.org/10.1016/j.cma.2020.112890

An efficient solution scheme for small-strain crystal-elasto-viscoplasticity in a dual framework

Daniel Wicht, Matti Schneider and Thomas Böhlke
Computer Methods in Applied Mechanics and Engineering 358 112611 (2020)
https://doi.org/10.1016/j.cma.2019.112611

Effective response of heterogeneous materials using the recursive projection method

Xiaoyao Peng, Dhriti Nepal and Kaushik Dayal
Computer Methods in Applied Mechanics and Engineering 364 112946 (2020)
https://doi.org/10.1016/j.cma.2020.112946

Analysis of the damage initiation in a SiC/SiC composite tube from a direct comparison between large-scale numerical simulation and synchrotron X-ray micro-computed tomography

Yang Chen, Lionel Gélébart, Camille Chateau, et al.
International Journal of Solids and Structures 161 111 (2019)
https://doi.org/10.1016/j.ijsolstr.2018.11.009

Exact relations for Green’s functions in linear PDE and boundary field equalities: a generalization of conservation laws

Graeme W. Milton and Daniel Onofrei
Research in the Mathematical Sciences 6 (2) (2019)
https://doi.org/10.1007/s40687-019-0179-z

A coupled FE-FFT multiscale method for progressive damage analysis of 3D braided composite beam under bending load

Guodong Fang, Bing Wang and Jun Liang
Composites Science and Technology 181 107691 (2019)
https://doi.org/10.1016/j.compscitech.2019.107691

DEM model for simulation of crack propagation in plasma-sprayed alumina coatings

N. Ferguen, Y. Mebdoua-Lahmar, H. Lahmar, W. Leclerc and M. Guessasma
Surface and Coatings Technology 371 287 (2019)
https://doi.org/10.1016/j.surfcoat.2018.07.065

On the Barzilai‐Borwein basic scheme in FFT‐based computational homogenization

Matti Schneider
International Journal for Numerical Methods in Engineering 118 (8) 482 (2019)
https://doi.org/10.1002/nme.6023

DBFFT: A displacement based FFT approach for non-linear homogenization of the mechanical behavior

S. Lucarini and J. Segurado
International Journal of Engineering Science 144 103131 (2019)
https://doi.org/10.1016/j.ijengsci.2019.103131

An algorithm for stress and mixed control in Galerkin‐based FFT homogenization

S. Lucarini and J. Segurado
International Journal for Numerical Methods in Engineering 119 (8) 797 (2019)
https://doi.org/10.1002/nme.6069

On polarization-based schemes for the FFT-based computational homogenization of inelastic materials

Matti Schneider, Daniel Wicht and Thomas Böhlke
Computational Mechanics 64 (4) 1073 (2019)
https://doi.org/10.1007/s00466-019-01694-3

Numerical Prediction of Multiscale Electronic Conductivity of Lithium-Ion Battery Positive Electrodes

F. Cadiou, A. Etiemble, T. Douillard, et al.
Journal of The Electrochemical Society 166 (8) A1692 (2019)
https://doi.org/10.1149/2.1221908jes

DAMASK – The Düsseldorf Advanced Material Simulation Kit for modeling multi-physics crystal plasticity, thermal, and damage phenomena from the single crystal up to the component scale

F. Roters, M. Diehl, P. Shanthraj, et al.
Computational Materials Science 158 420 (2019)
https://doi.org/10.1016/j.commatsci.2018.04.030

Lippmann‐Schwinger solvers for the explicit jump discretization for thermal computational homogenization problems

Christian Dorn and Matti Schneider
International Journal for Numerical Methods in Engineering 118 (11) 631 (2019)
https://doi.org/10.1002/nme.6030

A FFT solver for variational phase-field modeling of brittle fracture

Yang Chen, Dmytro Vasiukov, Lionel Gélébart and Chung Hae Park
Computer Methods in Applied Mechanics and Engineering 349 167 (2019)
https://doi.org/10.1016/j.cma.2019.02.017

Homogenization of cortical bone reveals that the organization and shape of pores marginally affect elasticity

Xiran Cai, Renald Brenner, Laura Peralta, et al.
Journal of The Royal Society Interface 16 (151) 20180911 (2019)
https://doi.org/10.1098/rsif.2018.0911

On the mathematical foundations of the self-consistent clustering analysis for non-linear materials at small strains

Matti Schneider
Computer Methods in Applied Mechanics and Engineering 354 783 (2019)
https://doi.org/10.1016/j.cma.2019.06.003

Development of a new consistent discrete green operator for FFT-based methods to solve heterogeneous problems with eigenstrains

Komlavi Sényo Eloh, Alain Jacques and Stéphane Berbenni
International Journal of Plasticity 116 1 (2019)
https://doi.org/10.1016/j.ijplas.2018.10.011

Convergence of iterative methods based on Neumann series for composite materials: Theory and practice

Hervé Moulinec, Pierre Suquet and Graeme W. Milton
International Journal for Numerical Methods in Engineering 114 (10) 1103 (2018)
https://doi.org/10.1002/nme.5777

An algorithmically consistent macroscopic tangent operator for FFT‐based computational homogenization

Felix Selim Göküzüm and Marc‐André Keip
International Journal for Numerical Methods in Engineering 113 (4) 581 (2018)
https://doi.org/10.1002/nme.5627

Particle-induced damage in Fe–TiB2 high stiffness metal matrix composite steels

Ding Wang, Pratheek Shanthraj, Hauke Springer and Dierk Raabe
Materials & Design 160 557 (2018)
https://doi.org/10.1016/j.matdes.2018.09.033

Random distribution of polydisperse ellipsoidal inclusions and homogenization estimates for porous elastic materials

K. Anoukou, R. Brenner, F. Hong, M. Pellerin and K. Danas
Computers & Structures 210 87 (2018)
https://doi.org/10.1016/j.compstruc.2018.08.006

Conductivity of composites with multiple polygonal aggregates, theoretical estimates and numerical solutions from polarization series

Hoang-Long Nguyen and Quy-Dong To
International Journal of Engineering Science 123 109 (2018)
https://doi.org/10.1016/j.ijengsci.2017.11.005

Advances in Crystals and Elastic Metamaterials, Part 1

Javier Segurado, Ricardo A. Lebensohn and Javier LLorca
Advances in Applied Mechanics, Advances in Crystals and Elastic Metamaterials, Part 1 51 1 (2018)
https://doi.org/10.1016/bs.aams.2018.07.001

Estimating the mechanical properties of hydrating blended cementitious materials: An investigation based on micromechanics

F. Lavergne, A. Ben Fraj, I. Bayane and J.F. Barthélémy
Cement and Concrete Research 104 37 (2018)
https://doi.org/10.1016/j.cemconres.2017.10.018

Multiscale Modeling of Heterogeneous Structures

Julian Kochmann, Lisa Ehle, Stephan Wulfinghoff, et al.
Lecture Notes in Applied and Computational Mechanics, Multiscale Modeling of Heterogeneous Structures 86 129 (2018)
https://doi.org/10.1007/978-3-319-65463-8_7

Influences of micro-pores and meso-pores on elastic and plastic properties of porous materials

Y.J. Cao, W.Q. Shen, J.F. Shao and N. Burlion
European Journal of Mechanics - A/Solids 72 407 (2018)
https://doi.org/10.1016/j.euromechsol.2018.06.003

Thermoelastic properties of microcracked polycrystals. Part I: Adequacy of Fourier-based methods for cracked elastic bodies

Jean-Baptiste Gasnier, François Willot, Hervé Trumel, Dominique Jeulin and Jacques Besson
International Journal of Solids and Structures 155 248 (2018)
https://doi.org/10.1016/j.ijsolstr.2018.07.024

The Effect of Crystal Defects on 3D High-Resolution Diffraction Peaks: A FFT-Based Method

Komlavi Senyo Eloh, Alain Jacques, Gabor Ribarik and Stéphane Berbenni
Materials 11 (9) 1669 (2018)
https://doi.org/10.3390/ma11091669

A damage model of mechanical behavior of porous materials: Application to sandstone

MY Li, YJ Cao, WQ Shen and JF Shao
International Journal of Damage Mechanics 27 (9) 1325 (2018)
https://doi.org/10.1177/1056789516685379

Upscaling the elastic stiffness of foam concrete as a three-phase composite material

M. Ben Youssef, F. Lavergne, K. Sab, K. Miled and J. Neji
Cement and Concrete Research 110 13 (2018)
https://doi.org/10.1016/j.cemconres.2018.04.021

Overall elastic properties of composites from optimal strong contrast expansion

Quy-Dong To, Minh-Tan Nguyen, Guy Bonnet, Vincent Monchiet and Viet-Thanh To
International Journal of Solids and Structures 120 245 (2017)
https://doi.org/10.1016/j.ijsolstr.2017.05.006

FFT‐based homogenization for microstructures discretized by linear hexahedral elements

Matti Schneider, Dennis Merkert and Matthias Kabel
International Journal for Numerical Methods in Engineering 109 (10) 1461 (2017)
https://doi.org/10.1002/nme.5336

Crystal plasticity study on stress and strain partitioning in a measured 3D dual phase steel microstructure

M. Diehl, D. An, P. Shanthraj, et al.
Physical Mesomechanics 20 (3) 311 (2017)
https://doi.org/10.1134/S1029959917030079

A finite element perspective on nonlinear FFT-based micromechanical simulations

J. Zeman, T. W. J. de Geus, J. Vondřejc, R. H. J. Peerlings and M. G. D. Geers
International Journal for Numerical Methods in Engineering 111 (10) 903 (2017)
https://doi.org/10.1002/nme.5481

Overall viscoelastic properties of 2D and two-phase periodic composites constituted of elliptical and rectangular heterogeneities

Quy-Dong To, Sy-Tuan Nguyen, Guy Bonnet and Minh-Ngoc Vu
European Journal of Mechanics - A/Solids 64 186 (2017)
https://doi.org/10.1016/j.euromechsol.2017.03.004

Reconstructing displacements from the solution to the periodic Lippmann–Schwinger equation discretized on a uniform grid

Sébastien Brisard
International Journal for Numerical Methods in Engineering 109 (4) 459 (2017)
https://doi.org/10.1002/nme.5263

Calculation of cancellous bone elastic properties with the polarization‐based FFT iterative scheme

Lucas Colabella, Ariel Alejandro Ibarra Pino, Josefina Ballarre, Piotr Kowalczyk and Adrián Pablo Cisilino
International Journal for Numerical Methods in Biomedical Engineering 33 (11) (2017)
https://doi.org/10.1002/cnm.2879

Finite strain FFT-based non-linear solvers made simple

T.W.J. de Geus, J. Vondřejc, J. Zeman, R.H.J. Peerlings and M.G.D. Geers
Computer Methods in Applied Mechanics and Engineering 318 412 (2017)
https://doi.org/10.1016/j.cma.2016.12.032

Numerical simulations and modeling of the effective plastic flow surface of a biporous material with pressurizedintergranular voids

Guylaine Boittin, Pierre-Guy Vincent, Hervé Moulinec and Mihai Gărăjeu
Computer Methods in Applied Mechanics and Engineering 323 174 (2017)
https://doi.org/10.1016/j.cma.2017.05.004

An FFT-based fast gradient method for elastic and inelastic unit cell homogenization problems

Matti Schneider
Computer Methods in Applied Mechanics and Engineering 315 846 (2017)
https://doi.org/10.1016/j.cma.2016.11.004

Prediction of Effective Properties of Porous Carbon Electrodes from a Parametric 3D Random Morphological Model

Torben Prill, Dominique Jeulin, François Willot, Juan Balach and Flavio Soldera
Transport in Porous Media 120 (1) 141 (2017)
https://doi.org/10.1007/s11242-017-0913-1

A comparative study on low-memory iterative solvers for FFT-based homogenization of periodic media

Nachiketa Mishra, Jaroslav Vondřejc and Jan Zeman
Journal of Computational Physics 321 151 (2016)
https://doi.org/10.1016/j.jcp.2016.05.041

A model order reduction method for computational homogenization at finite strains on regular grids using hyperelastic laminates to approximate interfaces

Matthias Kabel, Felix Ospald and Matti Schneider
Computer Methods in Applied Mechanics and Engineering 309 476 (2016)
https://doi.org/10.1016/j.cma.2016.06.021

Explicit effective elasticity tensors of two-phase periodic composites with spherical or ellipsoidal inclusions

Quy-Dong To, Guy Bonnet and Duc-Hieu Hoang
International Journal of Solids and Structures 94-95 100 (2016)
https://doi.org/10.1016/j.ijsolstr.2016.05.005

Neighborhood influences on stress and strain partitioning in dual-phase microstructures

Martin Diehl, Pratheek Shanthraj, Philip Eisenlohr and Franz Roters
Meccanica 51 (2) 429 (2016)
https://doi.org/10.1007/s11012-015-0281-2

A numerical investigation of effective thermoelastic properties of interconnected alumina/Al composites using FFT and FE approaches

W. Leclerc, N. Ferguen, C. Pélegris, et al.
Mechanics of Materials 92 42 (2016)
https://doi.org/10.1016/j.mechmat.2015.09.002

Controlled accuracy finite element estimates for the effective stiffness of composites with spherical inclusions

Andrei A. Gusev
International Journal of Solids and Structures 80 227 (2016)
https://doi.org/10.1016/j.ijsolstr.2015.11.006

A full-field image conversion method for the inverse conductivity problem with internal measurements

Cédric Bellis and Hervé Moulinec
Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences 472 (2187) 20150488 (2016)
https://doi.org/10.1098/rspa.2015.0488

Conductivity estimates of spherical-particle suspensions based on triplet structure factors

Minh-Tan Nguyen, Vincent Monchiet, Guy Bonnet and Quy-Dong To
Physical Review E 93 (2) (2016)
https://doi.org/10.1103/PhysRevE.93.022105

Processing, Properties, and Design of Advanced Ceramics and Composites: Ceramic Transactions

N. Ferguen, Y. Lahmar, Y. Fizi, et al.
Processing, Properties, and Design of Advanced Ceramics and Composites: Ceramic Transactions 325 (2016)
https://doi.org/10.1002/9781119323303.ch28

Homogenization schemes for aging linear viscoelastic matrix-inclusion composite materials with elongated inclusions

F. Lavergne, K. Sab, J. Sanahuja, M. Bornert and C. Toulemonde
International Journal of Solids and Structures 80 545 (2016)
https://doi.org/10.1016/j.ijsolstr.2015.10.014

Two-scale FE-FFT- and phase-field-based computational modeling of bulk microstructural evolution and macroscopic material behavior

Julian Kochmann, Stephan Wulfinghoff, Stefanie Reese, Jaber Rezaei Mianroodi and Bob Svendsen
Computer Methods in Applied Mechanics and Engineering (2016)
https://doi.org/10.1016/j.cma.2016.03.001

Generalized Continua as Models for Classical and Advanced Materials

Stéphane Berbenni, Vincent Taupin, Claude Fressengeas and Laurent Capolungo
Advanced Structured Materials, Generalized Continua as Models for Classical and Advanced Materials 42 47 (2016)
https://doi.org/10.1007/978-3-319-31721-2_4

Improved guaranteed computable bounds on homogenized properties of periodic media by the Fourier-Galerkin method with exact integration

Jaroslav Vondřejc
International Journal for Numerical Methods in Engineering 107 (13) 1106 (2016)
https://doi.org/10.1002/nme.5199

Time domain finite element estimates of dynamic stiffness of viscoelastic composites with stiff spherical inclusions

Andrei A. Gusev
International Journal of Solids and Structures 88-89 79 (2016)
https://doi.org/10.1016/j.ijsolstr.2016.03.021

A virtual laboratory using high resolution crystal plasticity simulations to determine the initial yield surface for sheet metal forming operations

Haiming Zhang, Martin Diehl, Franz Roters and Dierk Raabe
International Journal of Plasticity 80 111 (2016)
https://doi.org/10.1016/j.ijplas.2016.01.002

Micromechanical modelling of twinning in polycrystalline materials: Application to magnesium

Charles Mareau and Mark R. Daymond
International Journal of Plasticity 85 156 (2016)
https://doi.org/10.1016/j.ijplas.2016.07.007

Computational homogenization of elasticity on a staggered grid

Matti Schneider, Felix Ospald and Matthias Kabel
International Journal for Numerical Methods in Engineering 105 (9) 693 (2016)
https://doi.org/10.1002/nme.5008

Field Dislocation Mechanics for heterogeneous elastic materials: A numerical spectral approach

Komlan Sénam Djaka, Aurélien Villani, Vincent Taupin, Laurent Capolungo and Stéphane Berbenni
Computer Methods in Applied Mechanics and Engineering (2016)
https://doi.org/10.1016/j.cma.2016.11.036

Measure of combined effects of morphological parameters of inclusions within composite materials via stochastic homogenization to determine effective mechanical properties

Vladimir Salnikov, Sophie Lemaitre, Daniel Choï and Philippe Karamian-Surville
Composite Structures 129 122 (2015)
https://doi.org/10.1016/j.compstruct.2015.03.076

A FFT-based formulation for efficient mechanical fields computation in isotropic and anisotropic periodic discrete dislocation dynamics

N Bertin, M V Upadhyay, C Pradalier and L Capolungo
Modelling and Simulation in Materials Science and Engineering 23 (6) 065009 (2015)
https://doi.org/10.1088/0965-0393/23/6/065009

Filtering material properties to improve FFT-based methods for numerical homogenization

Lionel Gélébart and Franck Ouaki
Journal of Computational Physics 294 90 (2015)
https://doi.org/10.1016/j.jcp.2015.03.048

An efficient and automated 3D FE approach to evaluate effective elastic properties of overlapping random fibre composites

W. Leclerc, P. Karamian-Surville and A. Vivet
Computational Materials Science 99 1 (2015)
https://doi.org/10.1016/j.commatsci.2014.10.047