Articles citing this article

The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).

Cited article:

Automated detection of delamination defects in laminated CFRP composites using a novel transmitter–receiver rotating eddy current sensor

Bensalah Chettouh, Ahmed Chaouki Lahrech, Bachir Helifa and Iben-Khaldoun Lefkaier
Sensors and Actuators A: Physical 387 116436 (2025)
https://doi.org/10.1016/j.sna.2025.116436

Numerical and Experimental Investigations of Flaws Detection in Multilayer HTS Tapes by Magnetothermal Technique

Walid Dirahoui and Hocine Menana
IEEE Journal on Multiscale and Multiphysics Computational Techniques 8 233 (2023)
https://doi.org/10.1109/JMMCT.2023.3275321

The influence of interlaminar microstructure on the induction heating patterns of CFRP laminates

Renil Thomas Kidangan, Sreedhar Unnikrishnakurup, Chitti Venkata Krishnamurthy and Krishnan Balasubramaniam
Materials Today Communications 33 104338 (2022)
https://doi.org/10.1016/j.mtcomm.2022.104338

Identification of the fiber breakage orientation in carbon fiber reinforced polymer composites using induction thermography

Renil Thomas Kidangan, Chitti Venkata Krishnamurthy and Krishnan Balasubramaniam
NDT & E International 122 102498 (2021)
https://doi.org/10.1016/j.ndteint.2021.102498

Characterization of Electrical Conductivity of Anisotropic CFRP Materials by Means of Induction Thermography Technique

H. K. Bui, F. D. Senghor, G. Wasselynck, et al.
IEEE Transactions on Magnetics 54 (3) 1 (2018)
https://doi.org/10.1109/TMAG.2017.2742979

Characterisation of the impact induced damage in composites by cross-comparison among experimental non-destructive evaluation techniques and numerical simulations

A Riccio, S Saputo, A Sellitto and V Lopresto
Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 231 (16) 3077 (2017)
https://doi.org/10.1177/0954406216681595