Articles citing this article

The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).

Cited article:

Characterization of polycrystalline cBN compacts sintered without any additives

N. Tan, C. J. Liu, Y. J. Li, Y. W. Dou, H. K. Wang, H. Ma, Z. L. Kou, D. W. He

Eur. Phys. J. Appl. Phys., 53 1 (2011) 11501

Published online: 2010-12-23

DOI: https://doi.org/10.1051/epjap/2010100321

This article has been cited by the following article(s):

Microstructure and phase composition of Ti-coated cBN powders intended for active coating technology (ACT) processes

Jerzy Morgiel, Piotr Klimczyk, Radosław Lach and Agnieszka Gubernat
Applied Surface Science 680 161378 (2025)
https://doi.org/10.1016/j.apsusc.2024.161378

Reaction behavior during Spark Plasma Sintering of cBN-TiCN-Ni powders

Ricardo Mineiro, C.M. Fernandes, E.L. Silva, M.R. Soares, D. Figueiredo, B. Ferrari, A.J. Sanchez-Herencia and A.M.R. Senos
Journal of the European Ceramic Society 43 (15) 6783 (2023)
https://doi.org/10.1016/j.jeurceramsoc.2023.06.074

Study on the properties and fracture mode of pure polycrystalline cubic boron nitride with different particle sizes

Hao Wang, Fuming Deng, Zhuowei Zhang, et al.
International Journal of Refractory Metals and Hard Materials 95 105446 (2021)
https://doi.org/10.1016/j.ijrmhm.2020.105446

Polycrystalline cubic boron nitride prepared with cubic-hexagonal boron nitride under high pressure and high temperature

Ming Yang, Zi-Li Kou, Teng Liu, et al.
Chinese Physics B 27 (5) 056105 (2018)
https://doi.org/10.1088/1674-1056/27/5/056105

Preparation of superhard cubic boron nitride sintered from commercially available submicron powders

Teng Liu, Zili Kou, Jingrui Lu, Xiaozhi Yan, Fangming Liu, Xin Li, Wei Ding, Jin Liu, Qiang Zhang, Qiang Wang, Dejiang Ma, Li Lei and Duanwei He
Journal of Applied Physics 121 (12) (2017)
https://doi.org/10.1063/1.4979312

An Assessment of the Wear Characteristics of Microcutting Arrays Produced From Polycrystalline Diamond and Cubic Boron Nitride Composites

M. Pacella, D. A. Axinte, P. W. Butler-Smith, et al.
Journal of Manufacturing Science and Engineering 138 (2) (2016)
https://doi.org/10.1115/1.4030761