Conductive nanocomposite ceramics as tribological and electrical contact materials
Eur. Phys. J. Appl. Phys., 49 2 (2010) 22902
Published online: 2009-12-22
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Optimization of Si3N4 interfacial adhesion with nitride and carbide coatings
Hamid Sharifi, Mohammad A. Sami, Arden L. Moore and Collin D. WickMaterials & Design 266 116095 (2026)
https://doi.org/10.1016/j.matdes.2026.116095
A review of nanostructured carbon dioxide sensors based on electrical and thermal conductivity
Firouzeh Salimian, Alireza Hemmati and Ahad GhaemiResults in Engineering 26 105633 (2025)
https://doi.org/10.1016/j.rineng.2025.105633
Review on characterization, impacts and optimization of EDM parameters on composite structure in additive manufacturing
L. Selvarajan, K. Venkataramanan, K. P. Srinivasa Perumal, Sameer Alghanmi, S. Paulraj, V. Ellappan, K. Venkatesh, Bishub Choudhury, S. Jayamurugan, G. Sakthivel and N. KasthuriProgress in Additive Manufacturing 10 (8) 4573 (2025)
https://doi.org/10.1007/s40964-024-00907-3
Wear-free sliding electrical contacts with ultralow electrical resistivity
Zhanghui Wu, Yiran Wang, Tielin Wu, Yelingyi Wang, Weipeng Chen, Chucheng Zhou, Ming Ma and Quanshui ZhengProceedings of the National Academy of Sciences 121 (47) (2024)
https://doi.org/10.1073/pnas.2406800121
Hard Wear-Resistant Ti-Si-C Coatings for Cu-Cr Electrical Contacts
Ph. Kiryukhantsev-Korneev, A. Sytchenko, D. Moskovskikh, K. Kuskov, L. Volkova, M. Poliakov, Y. Pogozhev, S. Yudin, E. Yakushko and A. NepapushevMaterials 16 (3) 936 (2023)
https://doi.org/10.3390/ma16030936
Characterization of a printed-circuit board by X-ray fluorescence and X-ray diffraction analyses for metal recovery
Shintaro Ichikawa, Yuya Hirokawa, Tsutomu Kurisaki and Toshihiro NakamuraSpectrochimica Acta Part B: Atomic Spectroscopy 210 106819 (2023)
https://doi.org/10.1016/j.sab.2023.106819
Conductive and tribological properties of TiN-Ag composite coatings under grease lubrication
Feihu Lin, Yanqiu Xia and Xin FengFriction 9 (4) 774 (2021)
https://doi.org/10.1007/s40544-020-0373-4
Reference binding energies of transition metal carbides by core-level x-ray photoelectron spectroscopy free from Ar+ etching artefacts
G. Greczynski, D. Primetzhofer and L. HultmanApplied Surface Science 436 102 (2018)
https://doi.org/10.1016/j.apsusc.2017.11.264
Passive films on nanocomposite carbide coatings for electrical contact applications
Kristian Nygren, Anna Mikaela Andersson, Per Eklund and Ulf JanssonJournal of Materials Science 52 (13) 8231 (2017)
https://doi.org/10.1007/s10853-017-1039-0
Effect of dopant concentration on structural and optical properties Mn doped ZnS films prepared by CBD method
D. Talantikite-Touati, H. Merzouk, H. Haddad and A. TounsiOptik 136 362 (2017)
https://doi.org/10.1016/j.ijleo.2017.02.032
Growth and characterization of chromium carbide films deposited by high rate reactive magnetron sputtering for electrical contact applications
Kristian Nygren, Mattias Samuelsson, Axel Flink, Henrik Ljungcrantz, Åsa Kassman Rudolphi and Ulf JanssonSurface and Coatings Technology 260 326 (2014)
https://doi.org/10.1016/j.surfcoat.2014.06.069
Reactive sputtering of NbCx-based nanocomposite coatings: An up-scaling study
N. Nedfors, O. Tengstrand, A. Flink, et al.Surface and Coatings Technology 253 100 (2014)
https://doi.org/10.1016/j.surfcoat.2014.05.021
Sputter deposition of transition-metal carbide films — A critical review from a chemical perspective
Ulf Jansson and Erik LewinThin Solid Films 536 1 (2013)
https://doi.org/10.1016/j.tsf.2013.02.019
Ni and Ti diffusion barrier layers between Ti–Si–C and Ti–Si–C–Ag nanocomposite coatings and Cu-based substrates
N.G. Sarius, J. Lauridsen, E. Lewin, et al.Surface and Coatings Technology 206 (8-9) 2558 (2012)
https://doi.org/10.1016/j.surfcoat.2011.11.014
Contact Resistance of Ti-Si-C-Ag and Ti-Si-C-Ag-Pd Nanocomposite Coatings
N. G. Sarius, J. Lauridsen, E. Lewin, et al.Journal of Electronic Materials 41 (3) 560 (2012)
https://doi.org/10.1007/s11664-011-1813-8
Structural, mechanical and electrical-contact properties of nanocrystalline-NbC/amorphous-C coatings deposited by magnetron sputtering
Nils Nedfors, Olof Tengstrand, Erik Lewin, et al.Surface and Coatings Technology 206 (2-3) 354 (2011)
https://doi.org/10.1016/j.surfcoat.2011.07.021
Friction and contact resistance of nanocomposite Ti–Ni–C coatings
Benny André, Erik Lewin, Ulf Jansson and Urban WiklundWear 270 (9-10) 555 (2011)
https://doi.org/10.1016/j.wear.2010.12.006
Synthesis, structure and properties of Ni-alloyed TiCx-based thin films
Erik Lewin, Benny André, Sigita Urbonaite, Urban Wiklund and Ulf JanssonJournal of Materials Chemistry 20 (28) 5950 (2010)
https://doi.org/10.1039/c0jm00592d
Industrialisation Study of Nanocomposite nc‐TiC/a‐C Coatings for Electrical Contact Applications
Erik Lewin, Erik Olsson, Benny André, Torbjörn Joelsson, Åke Öberg, Urban Wiklund, Henrik Ljungcrantz and Ulf JanssonPlasma Processes and Polymers 6 (S1) (2009)
https://doi.org/10.1002/ppap.200932303