Eur. Phys. J. Appl. Phys.
Volume 76, Number 2, November 2016
|Number of page(s)||9|
|Section||Semiconductors and Devices|
|Published online||18 November 2016|
Fast Track Article
Wide modulation bandwidth terahertz detection in 130 nm CMOS technology
ECSE Department, Rensselaer Polytechnic Institute, Troy, NY 12180, USA
2 ECE Department, Ain Shams University, 11566 Cairo, Egypt
3 Institut d’électronique et des Systèmes, UMR 5214 CNRS-Université de Montpellier, 34095 Montpellier, France
4 Laboratoire Charles Coulomb (L2C), UMR 5221 CNRS-Université de Montpellier, 34095 Montpellier, France
a e-mail: firstname.lastname@example.org
Revised: 7 October 2016
Accepted: 18 October 2016
Published online: 18 November 2016
Design, manufacturing and measurements results for silicon plasma wave transistors based wireless communication wideband receivers operating at 300 GHz carrier frequency are presented. We show the possibility of Si-CMOS based integrated circuits, in which by: (i) specific physics based plasma wave transistor design allowing impedance matching to the antenna and the amplifier, (ii) engineering the shape of the patch antenna through a stacked resonator approach and (iii) applying bandwidth enhancement strategies to the design of integrated broadband amplifier, we achieve an integrated circuit of the 300 GHz carrier frequency receiver for wireless wideband operation up to/over 10 GHz. This is, to the best of our knowledge, the first demonstration of low cost 130 nm Si-CMOS technology, plasma wave transistors based fast/wideband integrated receiver operating at 300 GHz atmospheric window. These results pave the way towards future large scale (cost effective) silicon technology based terahertz wireless communication receivers.
© EDP Sciences, 2016
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.