| Issue |
Eur. Phys. J. Appl. Phys.
Volume 63, Number 1, July 2013
|
|
|---|---|---|
| Article Number | 10302 | |
| Number of page(s) | 6 | |
| Section | Thin Films | |
| DOI | https://doi.org/10.1051/epjap/2013130219 | |
| Published online | 26 July 2013 | |
https://doi.org/10.1051/epjap/2013130219
Improving reliability of SCB initiators based on Al/Ni multilayer nanofilms
School of Chemical Engineeering, Nanjing University of Science and Technology, Nanjing, China
a e-mail: 719026474@qq.com
Received:
2
May
2013
Revised:
11
June
2013
Accepted:
17
June
2013
Published online:
26
July
2013
This paper exploits an energetic initiator realized by integrating Al/Ni multilayer nanofilms with semiconductor bridge (SCB). The as-deposited nanofilms have been characterized with varied analytical techniques. Results show that distinct nanofilms are sputter deposited in a layered geometry and give a heat of reaction equal to 1134 J/g. The firing tests of the initiators were accomplished using capacitor discharge unit. Results show that the initiators possess several excellent characteristics such as fast ignition time, low power consumption, high output energy and so on. Therefore, Al/Ni multilayer nanofilms are suitable heat source for improving the reliability of SCB initiators.
© EDP Sciences, 2013
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.