EDP Sciences Journals List
Home Document
Subscriber Authentication Point
Issue Eur. Phys. J. Appl. Phys.
Volume 47, Number 3, September 2009
Article Number 31101
Number of page(s) 10
Section Physics of Energy Generation, Conversion and Storage
DOI 10.1051/epjap/2009099
Published online 05 June 2009

Eur. Phys. J. Appl. Phys. 47, 31101 (2009)
DOI: 10.1051/epjap/2009099

Influence of the frequential identification tests on the induction machine modelling

M. Belhaj, P. Guérin, M.E. Zaïm and L. Abdeljalil

Institut de Recherche en Électrotechnique et Électronique de Nantes Atlantique (IREENA), 37 bd de l'université, BP 406, 44602, Saint-Nazaire, France

patrick.guerin@univ-nantes.fr

Received: 22 July 2008 / Received in final form: 5 February 2009 / Accepted: 30 March 2009 / Published online: 5 June 2009

Abstract
An electric network is constituted by generators providing power to various loads. The induction machine is the most common motor in the industrial applications because of its simplicity of construction, its reliability and its low cost. It allows the constant speed applications when it is directly supplied by the network and variable speed ones with the use of power converters. These speed drives induce important harmonic perturbations in the power system and in the motor side. In this context, we are interested by the frequential modelling of the induction machine in order to simulate the line current with its harmonic components. In order to use the induction machine models, it is necessary to identify their parameters and therefore realizing specific and sufficiently informative tests. Several tests of identification are presented in the literature; their differences and their relevance have not been discussed. This study deals with the realization and the comparison of several types of frequential tests (constant voltage, constant V/f, injection of DC current) for induction machine models identification. The comparison of the simulation results with the experimental measurements allows electing the most representative of the induction machine behaviour.

PACS
84.50.+d - Electric motors.

© EDP Sciences 2009


What is OpenURL?

The OpenURL standard is a protocol for transmission of metadata describing the resource that you wish to access. An OpenURL link contains article metadata and directs it to the OpenURL server of your choice. The OpenURL server can provide access to the resource and also offer complementary services (specific search engine, export of references...). The OpenURL link can be generated by different means.
  • If your librarian has set up your subscription with an OpenURL resolver, OpenURL links appear automatically on the abstract pages.
  • You can define your own OpenURL resolver with your EDPS Account. In this case your choice will be given priority over that of your library.
  • You can use an add-on for your browser (Firefox or I.E.) to display OpenURL links on a page (see http://www.openly.com/openurlref/). You should disable this module if you wish to use the OpenURL server that you or your library have defined.