EDP Sciences Journals List
Home Document
Subscriber Authentication Point
Open Access Option
Free access article

Issue Eur. Phys. J. Appl. Phys.
Volume 47, Number 1, July 2009
4th Colloquium Interdisciplinary in Instrumentation (C2I)
Article Number 10701
Number of page(s) 6
Section Photonics
DOI 10.1051/epjap/2009087
Published online 14 May 2009

Eur. Phys. J. Appl. Phys. 47, 10701 (2009)
DOI: 10.1051/epjap/2009087

Impedance model for the polarization-dependent optical absorption of superconducting single-photon detectors

E.F.C. Driessen1, F.R. Braakman1, E.M. Reiger2, S.N. Dorenbos2, V. Zwiller2 and M.J.A. de Dood1

1  Huygens Laboratory, Leiden University, P.O. Box 9504, 2300 RA Leiden, The Netherlands
2  Kavli Institute for Nanoscience, Delft University of Technology, Lorentzweg 1, 2628 CE Delft, The Netherlands

mdedood@molphys.leidenuniv.nl

Received: 20 February 2009 / Accepted: 9 March 2009 / Published online: 14 May 2009

Abstract
We measured the single-photon detection efficiency of NbN superconducting single-photon detectors as a function of the polarization state of the incident light for different wavelengths in the range from 488 nm to 1550 nm. The polarization contrast varies from ~5% at 488 nm to ~30% at 1550 nm, in good agreement with numerical calculations. We use an optical-impedance model to describe the absorption for polarization parallel to the wires of the detector. For the extremely lossy NbN material, the absorption can be kept constant by keeping the product of layer thickness and filling factor constant. As a consequence, the maximum possible absorption is independent of filling factor. By illuminating the detector through the substrate, an absorption efficiency of ~70% can be reached for a detector on Si or GaAs, without the need for an optical cavity.

PACS
85.25.-j - Superconducting devices.
13.88.+e - Polarization in interactions and scattering.

© EDP Sciences 2009


What is OpenURL?

The OpenURL standard is a protocol for transmission of metadata describing the resource that you wish to access. An OpenURL link contains article metadata and directs it to the OpenURL server of your choice. The OpenURL server can provide access to the resource and also offer complementary services (specific search engine, export of references...). The OpenURL link can be generated by different means.
  • If your librarian has set up your subscription with an OpenURL resolver, OpenURL links appear automatically on the abstract pages.
  • You can define your own OpenURL resolver with your EDPS Account. In this case your choice will be given priority over that of your library.
  • You can use an add-on for your browser (Firefox or I.E.) to display OpenURL links on a page (see http://www.openly.com/openurlref/). You should disable this module if you wish to use the OpenURL server that you or your library have defined.