|
|||||||||||||||
DOI: 10.1051/epjap:1999112
Eur. Phys. J. AP 5, 71-83
Influence of aging on electrolytic capacitors function in static converters: Fault prediction method
P. Venet - A. Lahyani - G. Grellet - A. Ah-Jaco
CEGELY, Université Claude Bernard de Lyon
, bâtiment 721,
43 boulevard du 11 Novembre 1918, 69622 Villeurbanne Cedex, France
venet@cegely.univ-lyon1.fr
Received: 20 March 1998 / Revised: 14 September 1998 / Accepted: 9 October 1998
Abstract
The failure of electrolytic capacitors is the cause of most breakdowns of
static converters. The function of these capacitors is to filter and to
store electrical
energy. Accelerated aging tests showed that the increase of the internal
resistance
ESR of the capacitors is a good indicator of their faulty state.
The filter function is
affected by the capacitors wearout on the one hand. At high frequency,
the voltage
ripple at the terminals of the capacitors increases according to ESR rise. On the other
hand, the storage function is not much influenced by the capacitors aging. As static
converters work most of the time at variable load, high transient values of the voltage
ripple occur when output current changes that can induce false alarms. These
transients are verified theoretically and experimentally. In order to avoid these
transients effects, we suggest to monitor the fundamental component of the voltage
ripple. This latter waveform is the best signature of the capacitors state. The ESR of
the capacitors and the time before their failure are deduced from the processing of
this waveform with other converter parameters such as input voltage, output current
and ambient temperature.
PACS
84.30.Jc Power electronics; power supply circuits
-
84.32.Tt Capacitors
-
84.37.+q Electric variable measurements (including voltage, current,
resistance, capacitance, inductance, impedance, and admittance, etc.)
Copyright EDP Sciences
| What is OpenURL? |
- If your librarian has set up your subscription with an OpenURL resolver, OpenURL links appear automatically on the abstract pages.
- You can define your own OpenURL resolver with your EDPS Account. In this case your choice will be given priority over that of your library.
- You can use an add-on for your browser (Firefox or I.E.) to display OpenURL links on a page (see http://www.openly.com/openurlref/). You should disable this module if you wish to use the OpenURL server that you or your library have defined.


Document
BibSonomy
CiteUlike
Connotea
Del.icio.us
Digg
Facebook